uk.comp.homebuilt
[Top] [All Lists]

Re: nForce4 Ultra motherboard & graphics card query

Subject: Re: nForce4 Ultra motherboard & graphics card query
From: Conor
Date: Sun, 29 Nov 2009 15:47:23 -0000
Newsgroups: uk.comp.homebuilt

In article <5c45h5dl28l3jgb6ha6cf0kavfd5ur8imk@xxxxxxx>, Multithreaded 
says...
> 
> The motherboard is an Abit AN8 Ultra with the above chipset, and the
> graphics card I propose to use is a generic nVidia GT220 card that
> cost less than 40 quid so is not a high-end, power-hungry card
> presumably. My noob question is this: there is no Molex connector for
> additional power on the card, unlike the AGP GT6600s I have in three
> of my machines, nor like that of the Radeon 9800XT, also AGP, that is
> in another PC. I notice, on reading the AN8 series manual, that my
> motherboard has an SLI variant that sports a Molex connector near one
> of the two PCI-E 16X slots, presumably to supply extra current to the
> graphics cards. But my board, the plain AN8 Ultra, has no such
> connector. Will there be an issue using power-hungry cards with this
> board, or can the PCI-E 16X specifications handle the extra current
> natively? Also, is the GT220 less power consuming than my AGP cards,
> even though its heatsink and fan are similarly proportioned?
> 
> I expect I may be flamed for even posting this niaive question, but
> every PC I've ever built since 2006 (that will be three in total, all
> using more modern Intel and AMD systems newer than AMD Socket 939) has
> used low end graphics cards, and I had just assumed that the higher
> end graphics cards would just be like my AGP ones, sporting that extra
> Molex connector.
> 
> Please, someone, just reassure me that taking apart my primo machine
> and fitting this kit will not result in more heartache than I have
> already suffered (see my posts about VIA chipset problems and a PATA
> hard disk dropping into PIO mode).

I ran a 9600GT on that board. The additional power for that card came 
off an adapter included with the card that hooked up to a spare HDD 
power supply connector. If the card doesn't need the power, there won't 
be a socket on it. All cards that need the additional power have a 
socket on because there's hardly any motherboards that have an 
additional power socket for the graphics.

Just put it together and turn it on...


-- 
Conor
www.notebooks-r-us.co.uk

I'm not prejudiced. I hate everybody equally.

<Prev in Thread] Current Thread [Next in Thread>