sci.electronics.basics (thread)

Drive logic/motor power supply, FyberOptic, 2006/08/31
- Re: Drive logic/motor power supply, Mr. J D, 2006/08/31
- Re: Drive logic/motor power supply, Mr. J D, 2006/08/31
Variable DC power supply, Stumpy, 2006/08/31
Conversion, P, 2006/08/31
- Re: Conversion, Chris, 2006/08/31
- Re: Conversion, PeteS, 2006/08/31
  - Re: Conversion, P, 2006/08/31
    - Re: Conversion, P, 2006/08/31
      
      Re: Conversion, Don Bowey, 2006/08/31
on on off off flasher unit?, Rob Convery, 2006/08/31
- Re: on on off off flasher unit?, Chris, 2006/08/31
  - Re: on on off off flasher unit?, Rob Convery, 2006/08/31
    - Re: on on off off flasher unit?, Rob Convery, 2006/08/31
  - Re: on on off off flasher unit?, Rob Convery, 2006/08/31
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch15_:_Linux_FTP_Server_Setup#Introduction, alex, 2006/08/31
high pass RC ckt, chrajesh911@xxxxxxxxx, 2006/08/31
- Re: high pass RC ckt, Phil Allison, 2006/08/31
Optical Sensor vs Optical Encoder, quanghoc, 2006/08/31
- Re: Optical Sensor vs Optical Encoder, Chris, 2006/08/31
- Re: Optical Sensor vs Optical Encoder, Jonathan Kirwan, 2006/08/31
  - Re: Optical Sensor vs Optical Encoder, Chris, 2006/08/31
    - Re: Optical Sensor vs Optical Encoder, Greg Hansen, 2006/08/31
      
      Re: Optical Sensor vs Optical Encoder, Jonathan Kirwan, 2006/08/31
    - Re: Optical Sensor vs Optical Encoder, Jonathan Kirwan, 2006/08/31
  - Re: Optical Sensor vs Optical Encoder, quanghoc, 2006/08/31
Looking for rechargeable 9v battery recommendation tia sal2, temp@xxxxxxxx, 2006/08/30
- Re: Looking for rechargeable 9v battery recommendation tia sal2, redbelly, 2006/08/30
  - Re: Looking for rechargeable 9v battery recommendation tia sal2, Caesar Valenti, 2006/08/31
    - Re: Looking for rechargeable 9v battery recommendation tia sal2, John Vallelunga, 2006/08/31
- Re: Looking for rechargeable 9v battery recommendation tia sal2, Robert Baer, 2006/08/31
  - Re: Looking for rechargeable 9v battery recommendation tia sal2, Tim Auton, 2006/08/31
why did it break, randomname, 2006/08/30
- Re: why did it break, Puckdropper, 2006/08/30
- Re: why did it break, Tim Williams, 2006/08/30
- Re: why did it break, Chris, 2006/08/31
- Re: why did it break, Eeyore, 2006/08/31
  - Re: why did it break, randomname, 2006/08/31
    - Re: why did it break, Eeyore, 2006/08/31
    - Re: why did it break, David Harmon, 2006/08/31
Touch Panel, quanghoc, 2006/08/30
- Re: Touch Panel, quanghoc, 2006/08/31
How Pixel works?, quanghoc, 2006/08/30
- Re: How Pixel works?, BobG, 2006/08/30
  - Re: How Pixel works?, quanghoc, 2006/08/30
    - Re: How Pixel works?, BobG, 2006/08/30
FM transmitter does not work on breadboard, chriswilliams, 2006/08/30
- Re: FM transmitter does not work on breadboard, BobG, 2006/08/30
- Re: FM transmitter does not work on breadboard, Eeyore, 2006/08/31
  - Re: FM transmitter does not work on breadboard, chriswilliams, 2006/08/31
- Re: FM transmitter does not work on breadboard, Don Bowey, 2006/08/31
model 85357 Digital Meter from R&B Inc., The Rock, 2006/08/30
- Re: model 85357 Digital Meter from R&B Inc., Homer J Simpson, 2006/08/30
  - Re: model 85357 Digital Meter from R&B Inc., Roscoe, 2006/08/30
    - Re: model 85357 Digital Meter from R&B Inc., Homer J Simpson, 2006/08/30
Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, TE Chea, 2006/08/30
- Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, John Larkin, 2006/08/30
  - Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Chris, 2006/08/31
  - Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, TE Chea, 2006/08/31
    - Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Eeyore, 2006/08/31
- Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Mr. J D, 2006/08/30
- Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Homer J Simpson, 2006/08/30
  - Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Puckdropper, 2006/08/30
    - Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Homer J Simpson, 2006/08/30
      
      Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, jfeng@xxxxxxxxxxx, 2006/08/31
      
      Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Homer J Simpson, 2006/08/31
      
      Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Eeyore, 2006/08/31
      
      Re: Can IC`s which run hot last longer if heatsinks are glued onto IC`s when new ?, Eeyore, 2006/08/31
Could someone please explain this?, Michael, 2006/08/30
- Re: Could someone please explain this?, vic, 2006/08/30
  - Re: Could someone please explain this?, Michael, 2006/08/30
PC component identification - major newbie..., Vespa, 2006/08/30
- Re: PC component identification - major newbie..., Eeyore, 2006/08/30
  - Re: PC component identification - major newbie..., Vespa, 2006/08/31
    - Re: PC component identification - major newbie..., Eeyore, 2006/08/31
Splicing RG6/QS, redbrickhat, 2006/08/30
- Re: Splicing RG6/QS, lnh, 2006/08/30
- Re: Splicing RG6/QS, Michael A. Terrell, 2006/08/30
LCD spec, quanghoc, 2006/08/30
- Re: LCD spec, John Fields, 2006/08/30
  - Re: LCD spec, quanghoc, 2006/08/30
where to find multimeter probe for connecting to male DB connectors?, Ian, 2006/08/29
- Re: where to find multimeter probe for connecting to male DB connectors?, Michael A. Terrell, 2006/08/29
  - Re: where to find multimeter probe for connecting to male DB connectors?, Ian, 2006/08/30
    - Re: where to find multimeter probe for connecting to male DB connectors?, Chris, 2006/08/31
Which material has high enough ohmage to resist lightning?, Radium, 2006/08/29
- Re: Which material has high enough ohmage to resist lightning?, Sjouke Burry, 2006/08/29
  - Re: Which material has high enough ohmage to resist lightning?, Homer J Simpson, 2006/08/30
- Re: Which material has high enough ohmage to resist lightning?, Bob Myers, 2006/08/29
- Re: Which material has high enough ohmage to resist lightning?, default, 2006/08/29
  - Re: Which material has high enough ohmage to resist lightning?, Radium, 2006/08/30
    - Re: Which material has high enough ohmage to resist lightning?, default, 2006/08/30
- Re: Which material has high enough ohmage to resist lightning?, Eeyore, 2006/08/29
- Re: Which material has high enough ohmage to resist lightning?, chuck, 2006/08/29
  - Re: Which material has high enough ohmage to resist lightning?, Mark Fortune, 2006/08/29
    - Re: Which material has high enough ohmage to resist lightning?, John Larkin, 2006/08/30
    - Re: Which material has high enough ohmage to resist lightning?, Michael A. Terrell, 2006/08/30
    - Re: Which material has high enough ohmage to resist lightning?, Bob Myers, 2006/08/30
  - Re: Which material has high enough ohmage to resist lightning?, Radium, 2006/08/30
    - Re: Which material has high enough ohmage to resist lightning?, John Fields, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, Mark Fortune, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, John Fields, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, John Larkin, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, Bob Myers, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, Sjouke Burry, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, Michael A. Terrell, 2006/08/31
    - Re: Which material has high enough ohmage to resist lightning?, Bob Myers, 2006/08/30
      
      Re: Which material has high enough ohmage to resist lightning?, Tim Williams, 2006/08/30
buy rudraksh and gems, alveena, 2006/08/29
Question on sizing inverter for cold-cathode fluorescent, NerveGas, 2006/08/29
amplifier, chrajesh911@xxxxxxxxx, 2006/08/29
- Re: amplifier, Jonathan Kirwan, 2006/08/29
  - Re: amplifier, Eeyore, 2006/08/29
    - Re: amplifier, phaeton, 2006/08/29
      
      Re: amplifier, Michael Black, 2006/08/29
- Re: amplifier, default, 2006/08/29
- Re: amplifier, John Popelish, 2006/08/29
  - Re: amplifier, Eeyore, 2006/08/29
    - Re: amplifier, jpopelish, 2006/08/29
  - Re: amplifier, Bill Bowden, 2006/08/30
    - Re: amplifier, Greg Neill, 2006/08/30
    - Re: amplifier, default, 2006/08/30
    - Re: amplifier, John Popelish, 2006/08/30
    - Re: amplifier, John O'Flaherty, 2006/08/30
    - Re: amplifier, Bob Myers, 2006/08/30
      
      Re: amplifier, Bill Bowden, 2006/08/31
      
      Re: amplifier, Bob Myers, 2006/08/31
    - Re: amplifier, jasen, 2006/08/31
- Re: amplifier, Jamie, 2006/08/30
Question about Gas Discharge Tube, quanghoc, 2006/08/29
- Re: Question about Gas Discharge Tube, Homer J Simpson, 2006/08/29
  - Re: Question about Gas Discharge Tube, quanghoc, 2006/08/29
    - Re: Question about Gas Discharge Tube, Homer J Simpson, 2006/08/29
Voice control technologies, FID, 2006/08/28
- Re: Voice control technologies, Sjouke Burry, 2006/08/28
[OT] Darwinism for Bob & Bob, Mike, 2006/08/28
- Re: [OT] Darwinism for Bob & Bob, Michael A. Terrell, 2006/08/29
  - Re: [OT] Darwinism for Bob & Bob, Mike, 2006/08/30
    - Re: [OT] Darwinism for Bob & Bob, Roger Dewhurst, 2006/08/31
      
      Re: [OT] Darwinism for Bob & Bob, Bob Masta, 2006/08/31
      
      Re: [OT] Darwinism for Bob & Bob, Michael A. Terrell, 2006/08/31
- Re: [OT] Darwinism for Bob & Bob, Roger Dewhurst, 2006/08/29
  - Re: [OT] Darwinism for Bob & Bob, Bob Masta, 2006/08/30
need help with wiring for my car project, Kevin Van Sant, 2006/08/28
- Re: need help with wiring for my car project, Tom Biasi, 2006/08/28
- Re: need help with wiring for my car project, JeffM, 2006/08/28
  - Re: need help with wiring for my car project, Kevin Van Sant, 2006/08/28
    - Re: need help with wiring for my car project, JeffM, 2006/08/28
      
      Re: need help with wiring for my car project, Kevin Van Sant, 2006/08/28
      
      Re: need help with wiring for my car project, JeffM, 2006/08/28
      
      Re: need help with wiring for my car project, Kevin Van Sant, 2006/08/28
    - Re: need help with wiring for my car project, Tim Auton, 2006/08/28
How to calculate ISF, crystal . lew, 2006/08/28
- Re: How to calculate ISF, Joel Kolstad, 2006/08/28
  - Re: How to calculate ISF, crystal . lew, 2006/08/30
    - Re: How to calculate ISF, Puckdropper, 2006/08/30
Questions about Current Transformers:, theCase, 2006/08/28
- Re: Questions about Current Transformers:, John Popelish, 2006/08/28
  - Re: Questions about Current Transformers:, theCase, 2006/08/29
    - Re: Questions about Current Transformers:, John Popelish, 2006/08/29
      
      Re: Questions about Current Transformers:, theCase, 2006/08/29
      
      Re: Questions about Current Transformers:, Ingvar Esk, 2006/08/29
      
      Re: Questions about Current Transformers:, jpopelish, 2006/08/29
- Re: Questions about Current Transformers:, John O'Flaherty, 2006/08/28
  - Re: Questions about Current Transformers:, BobG, 2006/08/28
    - Re: Questions about Current Transformers:, theCase, 2006/08/29
  - Re: Questions about Current Transformers:, John O'Flaherty, 2006/08/28
Expected voltage output of the PIC12F683., Mr. J D, 2006/08/28
- Re: Expected voltage output of the PIC12F683., Eeyore, 2006/08/28
  - Re: Expected voltage output of the PIC12F683., Mr. J D, 2006/08/28
    - Re: Expected voltage output of the PIC12F683., Tim Auton, 2006/08/28
Open Collector Relay Control, Hank Brandenburg, 2006/08/27
- Re: Open Collector Relay Control, default, 2006/08/28
  - Re: Open Collector Relay Control, Chris, 2006/08/28
- Re: Open Collector Relay Control, Jamie, 2006/08/28
- Re: Open Collector Relay Control, ehsjr, 2006/08/28
  - Re: Open Collector Relay Control, Chris, 2006/08/28
    - Re: Open Collector Relay Control, default, 2006/08/29
    - Re: Open Collector Relay Control, ehsjr, 2006/08/29
      
      Re: Open Collector Relay Control, Hank Brandenburg, 2006/08/29
      
      Re: Open Collector Relay Control, ehsjr, 2006/08/29
[OT] Darwinism for Bob and Bob, Mike, 2006/08/27
- Re: [OT] Darwinism for Bob and Bob, Tim Williams, 2006/08/28
  - Re: [OT] Darwinism for Bob and Bob, Mike, 2006/08/30
- Re: [OT] Darwinism for Bob and Bob, Clint Sharp, 2006/08/28
  - Re: [OT] Darwinism for Bob and Bob, Jonathan Kirwan, 2006/08/28
- Re: [OT] Darwinism for Bob and Bob, Bob Myers, 2006/08/28
- Re: [OT] Darwinism for Bob and Bob, Homer J Simpson, 2006/08/28
- [OT] Darwinism for Bob and Bob, Mike, 2006/08/28
- [OT] Darwinism for Bob and Bob, Mike, 2006/08/28
Re: my failure, Alan B, 2006/08/27
- Re: my failure, randomname, 2006/08/27
  - Re: my failure, Homer J Simpson, 2006/08/27
    - Re: my failure, Don Bruder, 2006/08/27
      
      Re: my failure, Puckdropper, 2006/08/27
    - Re: my failure, ehsjr, 2006/08/28
- Re: my failure, randomname, 2006/08/27
- Re: my failure, Homer J Simpson, 2006/08/27
Miller effect in CMOS inverter!, Francesco, 2006/08/27
- Re: Miller effect in CMOS inverter!, John Popelish, 2006/08/27
- Re: Miller effect in CMOS inverter!, Francesco, 2006/08/27
fading LED - nearly there, stardockmagic, 2006/08/26
- Re: fading LED - nearly there, John Fields, 2006/08/26
  - Re: fading LED - nearly there, stardockmagic, 2006/08/27
    - Re: fading LED - nearly there, John Fields, 2006/08/27
  - Re: fading LED - nearly there, stardockmagic, 2006/08/27
    - Re: fading LED - nearly there, stardockmagic, 2006/08/27
    - Re: fading LED - nearly there, stardockmagic, 2006/08/27
    - Re: fading LED - nearly there, John Fields, 2006/08/27
      
      Re: fading LED - nearly there, ehsjr, 2006/08/28
ANN: Open Instrumentation Project, Peter Hiscocks, 2006/08/26
What is the proper way to turn off a positive voltage supply with a NPN transistor?, Mr. J D, 2006/08/26
- Re: What is the proper way to turn off a positive voltage supply with a NPN transistor?, PeteS, 2006/08/26
- Re: What is the proper way to turn off a positive voltage supply with a NPN transistor?, John Fields, 2006/08/26
  - Re: What is the proper way to turn off a positive voltage supply with a NPN transistor?, Jonathan Kirwan, 2006/08/26
Looking for some ideas for DC motor control, Eric R Snow, 2006/08/26
- Re: Looking for some ideas for DC motor control, Mr. J D, 2006/08/26
  - Re: Looking for some ideas for DC motor control, Eric R Snow, 2006/08/26
- Re: Looking for some ideas for DC motor control, ehsjr, 2006/08/28
any book or web resource out there?, roohbir, 2006/08/26
- Re: any book or web resource out there?, Brian, 2006/08/26
- Re: any book or web resource out there?, Don Bowey, 2006/08/26
- Re: any book or web resource out there?, Mr. J D, 2006/08/26
- Re: any book or web resource out there?, Chris, 2006/08/26
- Re: any book or web resource out there?, Rodney Davies, 2006/08/26
- Re: any book or web resource out there?, Graham Knott, 2006/08/26
PWM lighting quest!, ...Ad!, 2006/08/25
- Re: PWM lighting quest!, Mr. J D, 2006/08/26
- Re: PWM lighting quest!, Phil Allison, 2006/08/26
- Re: PWM lighting quest!, default, 2006/08/26
- Re: PWM lighting quest!, James Thompson, 2006/08/26
- Re: PWM lighting quest!, Chris, 2006/08/26
  - Re: PWM lighting quest!, Chris, 2006/08/26
  - Re: PWM lighting quest!, ...Ad!, 2006/08/26
    - Re: PWM lighting quest!, Chris, 2006/08/27
- Re: PWM lighting quest!, ehsjr, 2006/08/28
  - Re: PWM lighting quest!, Phil Allison, 2006/08/28
  - Re: PWM lighting quest!, ...Ad!, 2006/08/31
    - Re: PWM lighting quest!, default, 2006/08/31
diode question, randomname, 2006/08/25
- Re: diode question, phaeton, 2006/08/25
  - Re: diode question, John Larkin, 2006/08/27
- Re: diode question, Don Bowey, 2006/08/25
  - Re: diode question, PeteS, 2006/08/25
    - Re: diode question, Alan B, 2006/08/26
      
      Re: diode question, Don Bowey, 2006/08/26
      
      Re: diode question, Jonathan Kirwan, 2006/08/26
      
      Re: diode question, Don Bowey, 2006/08/26
      
      Re: diode question, Tim Williams, 2006/08/26
      
      Re: diode question, Don Bowey, 2006/08/26
      
      Re: diode question, Jonathan Kirwan, 2006/08/27
      
      Re: diode question, Chris, 2006/08/27
- Re: diode question, me, 2006/08/26
  - Re: diode question, randomname, 2006/08/26
- Re: diode question, Eeyore, 2006/08/26
- Re: diode question, Mr. J D, 2006/08/26
  - Re: diode question, John Larkin, 2006/08/27
  - Re: diode question, Alan B, 2006/08/28
- Re: diode question, Mr. J D, 2006/08/26
  - Re: diode question, randomname, 2006/08/26
- Re: diode question, Alan B, 2006/08/26
  - Re: diode question, John Fields, 2006/08/26
    - Re: diode question, Alan B, 2006/08/27
    - Re: diode question, Tim Williams, 2006/08/27
      
      Re: diode question, John Fields, 2006/08/27
  - Re: diode question, John Larkin, 2006/08/27
    - Re: diode question, Alan B, 2006/08/27
      
      Re: diode question, John Larkin, 2006/08/27
      
      Re: diode question, Alan B, 2006/08/27
      
      Re: diode question, John Larkin, 2006/08/27
      
      Re: diode question, Alan B, 2006/08/27
- Re: diode question, ehsjr, 2006/08/28
Creating a higer wattage resistor, phaeton, 2006/08/25
- Re: Creating a higer wattage resistor, Tom Biasi, 2006/08/25
- Re: Creating a higer wattage resistor, John Ferrell, 2006/08/25
- Re: Creating a higer wattage resistor, Chris, 2006/08/25
  - Re: Creating a higer wattage resistor, Skeptic, 2006/08/25
    - Re: Creating a higer wattage resistor, John Fields, 2006/08/26
    - Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/27
      
      Re: Creating a higer wattage resistor, Skeptic, 2006/08/27
      
      Re: Creating a higer wattage resistor, tlbs101, 2006/08/28
      
      Re: Creating a higer wattage resistor, Peter Bennett, 2006/08/29
- Re: Creating a higer wattage resistor, John Fields, 2006/08/25
  - Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/26
    - Re: Creating a higer wattage resistor, John Fields, 2006/08/27
      
      Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/27
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/27
- Re: Creating a higer wattage resistor, petrus bitbyter, 2006/08/25
- Re: Creating a higer wattage resistor, Eeyore, 2006/08/26
- Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/27
  - Re: Creating a higer wattage resistor, John Fields, 2006/08/27
    - Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/27
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/27
      
      Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/27
      
      Re: Creating a higer wattage resistor, John Fields, 2006/08/27
      
      Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/28
      
      Re: Creating a higer wattage resistor, John Fields, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/27
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/27
      
      Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/28
      
      Re: Creating a higer wattage resistor, Abstract Dissonance, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/28
      
      Re: Creating a higer wattage resistor, Alan B, 2006/08/28
      
      Re: Creating a higer wattage resistor, John Fields, 2006/08/27
      
      Re: Creating a higer wattage resistor, ehsjr, 2006/08/28
- Re: Creating a higer wattage resistor, redbelly, 2006/08/27
  - Re: Creating a higer wattage resistor, John Fields, 2006/08/27
    - Re: Creating a higer wattage resistor, redbelly, 2006/08/29
      
      Re: Creating a higer wattage resistor, John Fields, 2006/08/29
      
      Re: Creating a higer wattage resistor, redbelly, 2006/08/29
soldering problem, mnrsiat, 2006/08/25
- Re: soldering problem, phaeton, 2006/08/25
- Re: soldering problem, Alan B, 2006/08/26
- Re: soldering problem, James Thompson, 2006/08/26
- Re: soldering problem, Chris, 2006/08/26
- Re: soldering problem, Jerry R, 2006/08/27
  - Re: soldering problem, mnrsiat, 2006/08/27
- Re: soldering problem, Homer J Simpson, 2006/08/27
Is it possible to multiply resistance?, randomname, 2006/08/25
- Re: Is it possible to multiply resistance?, Don McKenzie, 2006/08/25
- Re: Is it possible to multiply resistance?, John Fields, 2006/08/25
  - Re: Is it possible to multiply resistance?, phaeton, 2006/08/25
  - Re: Is it possible to multiply resistance?, randomname, 2006/08/26
    - Re: Is it possible to multiply resistance?, John Fields, 2006/08/26
      
      Re: Is it possible to multiply resistance?, randomname, 2006/08/26
- Re: Is it possible to multiply resistance?, Jamie, 2006/08/26
Re: Op-amp basic circuits questions, John Popelish, 2006/08/25
- Re: Op-amp basic circuits questions, Tim Auton, 2006/08/26
- Re: Op-amp basic circuits questions, Alan B, 2006/08/26
Size of Resistors, GraemeC, 2006/08/25
- Re: Size of Resistors, Chris, 2006/08/25
- Re: Size of Resistors, Jonathan Kirwan, 2006/08/25
  - Re: Size of Resistors, PeteS, 2006/08/25
    - Re: Size of Resistors, GraemeC, 2006/08/28
      
      Re: Size of Resistors, Jonathan Kirwan, 2006/08/28
transistor....., chrajesh911@xxxxxxxxx, 2006/08/25
- Re: transistor....., Don Bowey, 2006/08/25
- Re: transistor....., Chris, 2006/08/25
- Re: transistor....., Mr. J D, 2006/08/26
  - Re: transistor....., Tim Williams, 2006/08/26
- Re: transistor....., amitsheth, 2006/08/27
timed igniter for metal halide lamps, kfel, 2006/08/25
- Re: timed igniter for metal halide lamps, default, 2006/08/25
  - Re: timed igniter for metal halide lamps, kfel, 2006/08/25
- Re: timed igniter for metal halide lamps, Chris, 2006/08/25
  - Re: timed igniter for metal halide lamps, kfel, 2006/08/26
    - Re: timed igniter for metal halide lamps, Chris, 2006/08/26
      
      Re: timed igniter for metal halide lamps, kfel, 2006/08/29
      
      Re: timed igniter for metal halide lamps, Chris, 2006/08/29
      
      Re: timed igniter for metal halide lamps, kfel, 2006/08/29
      
      Re: timed igniter for metal halide lamps, Chris, 2006/08/29
      
      Re: timed igniter for metal halide lamps, Chris, 2006/08/29
fading red eyes, stardockmagic, 2006/08/25
- Re: fading red eyes, stardockmagic, 2006/08/25
  - Re: fading red eyes, Eeyore, 2006/08/25
    - Re: fading red eyes, stardockmagic, 2006/08/25
  - Re: fading red eyes, Greg Neill, 2006/08/25
    - Re: fading red eyes, stardockmagic, 2006/08/25
      
      Re: fading red eyes, Tom Biasi, 2006/08/26
      
      Re: fading red eyes, stardockmagic, 2006/08/26
- Re: fading red eyes, ehsjr, 2006/08/25
powerPC simulation, Cinmay, 2006/08/25
Re: I cleared all my student debts and loans, Homer J Simpson, 2006/08/25
OT: difference between scooter and cordless drill motors?, John Doe, 2006/08/25
- Re: OT: difference between scooter and cordless drill motors?, BobG, 2006/08/25
  - Re: OT: difference between scooter and cordless drill motors?, John Doe, 2006/08/25
    - Re: OT: difference between scooter and cordless drill motors?, Graboid, 2006/08/25
      
      Re: OT: difference between scooter and cordless drill motors?, BobG, 2006/08/25
      
      Re: OT: difference between scooter and cordless drill motors?, John Doe, 2006/08/26
Capacitor Dielectric Material?, Roland PJ, 2006/08/24
- Re: Capacitor Dielectric Material?, Don Bruder, 2006/08/25
  - Re: Capacitor Dielectric Material?, Roger Dewhurst, 2006/08/25
  - Re: Capacitor Dielectric Material?, phaeton, 2006/08/25
    - Re: Capacitor Dielectric Material?, default, 2006/08/25
      
      Re: Capacitor Dielectric Material?, phaeton, 2006/08/25
      
      Re: Capacitor Dielectric Material?, default, 2006/08/25
      
      Re: Capacitor Dielectric Material?, phaeton, 2006/08/26
      
      Re: Capacitor Dielectric Material?, default, 2006/08/26
      
      Re: Capacitor Dielectric Material?, Michael A. Terrell, 2006/08/26
    - Re: Capacitor Dielectric Material?, default, 2006/08/25
- Re: Capacitor Dielectric Material?, John Popelish, 2006/08/25
- Re: Capacitor Dielectric Material?, default, 2006/08/25
- Re: Capacitor Dielectric Material?, Greg Hansen, 2006/08/25
  - Re: Capacitor Dielectric Material?, default, 2006/08/26
- Re: Capacitor Dielectric Material?, Graboid, 2006/08/25
- Re: Capacitor Dielectric Material?, Bob Eld, 2006/08/25
  - Re: Capacitor Dielectric Material?, default, 2006/08/26
- Re: Capacitor Dielectric Material?, jasen, 2006/08/30
From 12V DC to 5+ V DC How to?, trezaei, 2006/08/24
- Re: From 12V DC to 5+ V DC How to?, trezaei, 2006/08/24
  - Re: From 12V DC to 5+ V DC How to?, Roger Dewhurst, 2006/08/25
  - Re: From 12V DC to 5+ V DC How to?, ehsjr, 2006/08/25
    - Re: From 12V DC to 5+ V DC How to?, trezaei, 2006/08/25
      
      Re: From 12V DC to 5+ V DC How to?, default, 2006/08/25
  - Re: From 12V DC to 5+ V DC How to?, trezaei, 2006/08/26
    - Re: From 12V DC to 5+ V DC How to?, ehsjr, 2006/08/28
- Re: From 12V DC to 5+ V DC How to?, default, 2006/08/25
- Re: From 12V DC to 5+ V DC How to?, HKJ, 2006/08/25
Opamp problem, lerameur, 2006/08/24
- Re: Opamp problem, Eeyore, 2006/08/24
  - Re: Opamp problem, lerameur, 2006/08/24
    - Re: Opamp problem, John Popelish, 2006/08/24
      
      Re: Opamp problem, lerameur, 2006/08/24
      
      Re: Opamp problem, John Popelish, 2006/08/24
      
      Re: Opamp problem, lerameur, 2006/08/24
      
      Re: Opamp problem, ehsjr, 2006/08/24
      
      Re: Opamp problem, lerameur, 2006/08/25
      
      Re: Opamp problem, John Popelish, 2006/08/25
      
      Re: Opamp problem, John Popelish, 2006/08/25
      
      Re: Opamp problem, Eeyore, 2006/08/25
      
      Re: Opamp problem, Don Bowey, 2006/08/24
      
      Re: Opamp problem, Peter Wing Larsen, 2006/08/26
      
      Re: Opamp problem, Don Bowey, 2006/08/26
      
      Re: Opamp problem, Peter Wing Larsen, 2006/08/26
      
      Re: Opamp problem, Don Bowey, 2006/08/27
- Re: Opamp problem, John Popelish, 2006/08/24
Orcad 10.5 question, lerameur, 2006/08/24
need microcontroller project, nitin, 2006/08/24
- Re: need microcontroller project, Chris, 2006/08/24
  - Re: need microcontroller project, nitin, 2006/08/24
    - Re: need microcontroller project, BobG, 2006/08/24
      
      Re: need microcontroller project, nitin, 2006/08/24
      
      Re: need microcontroller project, Eeyore, 2006/08/24
      
      Re: need microcontroller project, Chris, 2006/08/24
      
      Re: need microcontroller project, Chris, 2006/08/24
      
      Re: need microcontroller project, Eeyore, 2006/08/24
      
      Re: need microcontroller project, Michael A. Terrell, 2006/08/25
      
      Re: need microcontroller project, nitin, 2006/08/25
      
      Re: need microcontroller project, BobG, 2006/08/24
1PPS and 1 PPM signals driving, nds, 2006/08/24
Turns ratio on a 70V 10W Line matching transformer??, royalmp2001, 2006/08/24
- Re: Turns ratio on a 70V 10W Line matching transformer??, Phil Allison, 2006/08/24
- Re: Turns ratio on a 70V 10W Line matching transformer??, John Fields, 2006/08/24
  - Re: Turns ratio on a 70V 10W Line matching transformer??, John Fields, 2006/08/24
    - Re: Turns ratio on a 70V 10W Line matching transformer??, BobG, 2006/08/24
      
      Re: Turns ratio on a 70V 10W Line matching transformer??, John Fields, 2006/08/24
      
      Re: Turns ratio on a 70V 10W Line matching transformer??, Phil Allison, 2006/08/24
      
      Re: Turns ratio on a 70V 10W Line matching transformer??, John Fields, 2006/08/24
  - Re: Turns ratio on a 70V 10W Line matching transformer??, royalmp2001, 2006/08/25
  - Re: Turns ratio on a 70V 10W Line matching transformer??, royalmp2001, 2006/08/25
- Re: Turns ratio on a 70V 10W Line matching transformer??, jasen, 2006/08/26
5 in 1 Jumpstarter, mea305, 2006/08/24
- Re: 5 in 1 Jumpstarter, ehsjr, 2006/08/24
  - Re: 5 in 1 Jumpstarter, Chris, 2006/08/24
- Re: 5 in 1 Jumpstarter, Homer J Simpson, 2006/08/27
Voltage divider, lerameur, 2006/08/24
- Re: Voltage divider, Byron A Jeff, 2006/08/24
- Re: Voltage divider, Ralph Mowery, 2006/08/24
- Re: Voltage divider, Charles Schuler, 2006/08/24
  - Re: Voltage divider, lerameur, 2006/08/24
    - Re: Voltage divider, ehsjr, 2006/08/24
    - Re: Voltage divider, John Fields, 2006/08/24
- Re: Voltage divider, Jamie, 2006/08/24
- Re: Voltage divider, jasen, 2006/08/26
IEC Data Dictionary, quanghoc, 2006/08/23
Using Battery with Charger and Macerator, mea305, 2006/08/23
- Re: Using Battery with Charger and Macerator, ehsjr, 2006/08/23
Making an ink-level sensor for an inkjet printer, Al Deveron, 2006/08/23
- Re: Making an ink-level sensor for an inkjet printer, Tom Biasi, 2006/08/23
  - Re: Making an ink-level sensor for an inkjet printer, Al Deveron, 2006/08/23
    - Re: Making an ink-level sensor for an inkjet printer, Homer J Simpson, 2006/08/23
      
      Re: Making an ink-level sensor for an inkjet printer, Al Deveron, 2006/08/23
      
      Re: Making an ink-level sensor for an inkjet printer, Homer J Simpson, 2006/08/23
      
      Re: Making an ink-level sensor for an inkjet printer, Jamie, 2006/08/24
      
      Re: Making an ink-level sensor for an inkjet printer, Homer J Simpson, 2006/08/24
      
      Re: Making an ink-level sensor for an inkjet printer, Michael A. Terrell, 2006/08/24
      
      Re: Making an ink-level sensor for an inkjet printer, Homer J Simpson, 2006/08/24
    - Re: Making an ink-level sensor for an inkjet printer, jasen, 2006/08/24
      
      Re: Making an ink-level sensor for an inkjet printer, Michael A. Terrell, 2006/08/25
      
      Re: Making an ink-level sensor for an inkjet printer, Homer J Simpson, 2006/08/25
      
      Re: Making an ink-level sensor for an inkjet printer, jasen, 2006/08/31
      
      Re: Making an ink-level sensor for an inkjet printer, Michael A. Terrell, 2006/08/31
- Re: Making an ink-level sensor for an inkjet printer, cbarn24050, 2006/08/23
  - Re: Making an ink-level sensor for an inkjet printer, Al Deveron, 2006/08/23
- Re: Making an ink-level sensor for an inkjet printer, William Hightower, 2006/08/23
  - Re: Making an ink-level sensor for an inkjet printer, CWatters, 2006/08/23
- Re: Making an ink-level sensor for an inkjet printer, CWatters, 2006/08/23
- Re: Making an ink-level sensor for an inkjet printer, Jack, 2006/08/31
  - Re: off topic spam - anti-spam@xxxxxxxxxxxxxxxxxx, Michael A. Terrell, 2006/08/31
    - [OT] Figuring out a spammer's ISP, JeffM, 2006/08/31
      
      Re: [OT] Figuring out a spammer's ISP, Michael A. Terrell, 2006/08/31
      
      Re: Figuring out a spammer's ISP, JeffM, 2006/08/31
      
      Re: [OT] Figuring out a spammer's ISP, Eeyore, 2006/08/31
555 timer ref card, David Harmon, 2006/08/23
- Re: 555 timer ref card, John Fields, 2006/08/23
splitting voltage, randomname, 2006/08/23
- Re: splitting voltage, James Thompson, 2006/08/23
  - Re: splitting voltage, randomname, 2006/08/23
    - Re: splitting voltage, James Thompson, 2006/08/23
      
      Re: splitting voltage, randomname, 2006/08/23
    - Re: splitting voltage, default, 2006/08/23
      
      Re: splitting voltage, randomname, 2006/08/23
      
      Re: splitting voltage, ehsjr, 2006/08/23
      
      Re: splitting voltage, randomname, 2006/08/23
      
      Re: splitting voltage, default, 2006/08/23
      
      Re: splitting voltage, default, 2006/08/24
      
      Re: splitting voltage, randomname, 2006/08/24
      
      Re: splitting voltage, default, 2006/08/24
      
      Re: splitting voltage, John Fields, 2006/08/24
      
      Re: splitting voltage, ehsjr, 2006/08/24
      
      Re: splitting voltage, randomname, 2006/08/24
      
      Re: splitting voltage, randomname, 2006/08/24
      
      Re: splitting voltage, randomname, 2006/08/24
      
      Re: splitting voltage, ehsjr, 2006/08/25
      
      Re: splitting voltage, default, 2006/08/23
  - Re: splitting voltage, vic, 2006/08/23
Peak to Peak, WAZ, 2006/08/22
- Re: Peak to Peak, BobG, 2006/08/22
  - Re: Peak to Peak, chuck, 2006/08/22
  - Re: Peak to Peak, Eeyore, 2006/08/22
    - Re: Peak to Peak, BobG, 2006/08/22
      
      Re: Peak to Peak, PeteS, 2006/08/22
      
      Re: Peak to Peak, Don Bowey, 2006/08/22
      
      Re: Peak to Peak, BobG, 2006/08/23
      
      Re: Peak to Peak, Eeyore, 2006/08/23
      
      Re: Peak to Peak, Eeyore, 2006/08/22
      
      Re: Peak to Peak, Michael A. Terrell, 2006/08/23
      
      Re: Peak to Peak, BobG, 2006/08/23
      
      Re: Peak to Peak, ehsjr, 2006/08/23
      
      Re: Peak to Peak, Michael A. Terrell, 2006/08/23
      
      Re: Peak to Peak, jasen, 2006/08/23
      
      Re: Peak to Peak, Eeyore, 2006/08/23
      
      Re: Peak to Peak, Tim Auton, 2006/08/23
      
      Re: Peak to Peak, Phil Allison, 2006/08/23
      
      Re: Peak to Peak, jasen, 2006/08/24
      
      Re: Peak to Peak, Phil Allison, 2006/08/24
      
      Re: Peak to Peak, Greg Hansen, 2006/08/23
      
      Re: Peak to Peak, Alan B, 2006/08/27
      
      Re: Peak to Peak, John Larkin, 2006/08/27
      
      Re: Peak to Peak, BobG, 2006/08/27
      
      Re: Peak to Peak, Eeyore, 2006/08/27
      
      Re: Peak to Peak, John Fields, 2006/08/28
      
      Re: Peak to Peak, John Larkin, 2006/08/28
      
      Re: Peak to Peak, Bob Myers, 2006/08/28
      
      Re: Peak to Peak, John Larkin, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, John Fields, 2006/08/29
      
      Re: Peak to Peak, John Larkin, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, Fred Bartoli, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, Fred Bartoli, 2006/08/29
      
      Re: Peak to Peak, John Fields, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, John Larkin, 2006/08/29
      
      Re: Peak to Peak, John Larkin, 2006/08/29
      
      Re: Peak to Peak, John Fields, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, Phil Allison, 2006/08/29
      
      Re: Peak to Peak, Bob Myers, 2006/08/29
      
      Re: Peak to Peak, Fred Bartoli, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, John Fields, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, John Fields, 2006/08/29
      
      Re: Peak to Peak, Eeyore, 2006/08/29
      
      Re: Peak to Peak, Tim Auton, 2006/08/28
      
      Re: Peak to Peak, John Fields, 2006/08/28
      
      Re: Peak to Peak, Tim Auton, 2006/08/28
      
      Re: Peak to Peak, BobG, 2006/08/28
      
      Bob G = PITA TROLL, Phil Allison, 2006/08/28
      
      Re: Bob G = PITA TROLL, BobG, 2006/08/28
      
      Re: Bob G = PITA TROLL, Phil Allison, 2006/08/28
      
      Re: Bob G = PITA TROLL, Tim Auton, 2006/08/28
      
      Re: Bob G = PITA TROLL, BobG, 2006/08/28
      
      Re: Bob G = PITA TROLL, Tim Auton, 2006/08/28
      
      Re: Bob G = PITA TROLL, Eeyore, 2006/08/29
      
      Re: Bob G = PITA TROLL, Eeyore, 2006/08/29
      
      Re: Peak to Peak, Bob Myers, 2006/08/28
  - Re: Peak to Peak, Bob Myers, 2006/08/22
  - Re: Peak to Peak, Michael A. Terrell, 2006/08/23
  - Re: Peak to Peak, Phil Allison, 2006/08/23
    - Re: Peak to Peak, BobG, 2006/08/23
      
      Re: Peak to Peak, Phil Allison, 2006/08/23
      
      Re: Peak to Peak, BobG, 2006/08/23
- Re: Peak to Peak, Eeyore, 2006/08/22
  - Re: Peak to Peak, Danne, 2006/08/22
What is the use of FLUX when we solder?, WAZ, 2006/08/22
- Re: What is the use of FLUX when we solder?, Eeyore, 2006/08/22
- Re: What is the use of FLUX when we solder?, John Popelish, 2006/08/22
- Re: What is the use of FLUX when we solder?, Don Bruder, 2006/08/22
  - Re: What is the use of FLUX when we solder?, Bob Myers, 2006/08/23
    - Re: What is the use of FLUX when we solder?, Don Bruder, 2006/08/23
- Re: What is the use of FLUX when we solder?, Puckdropper, 2006/08/23
  - Re: What is the use of FLUX when we solder?, Eeyore, 2006/08/23
  - Re: What is the use of FLUX when we solder?, stratus46, 2006/08/24
Transformer, WAZ, 2006/08/22
- Re: Transformer, Eeyore, 2006/08/22
- Re: Transformer, John Fields, 2006/08/22
  - Re: Transformer, default, 2006/08/23
Question regarding the photodiode model, cuca, 2006/08/22
- Re: Question regarding the photodiode model, John Popelish, 2006/08/22
Re: ONLY ONE c l i c k FOR DISABLE PERSON ..., Michael A. Terrell, 2006/08/22
What is Continuous Audio?, quanghoc, 2006/08/22
- Re: What is Continuous Audio?, PeteS, 2006/08/22
  - Re: What is Continuous Audio?, quanghoc, 2006/08/22
    - Re: What is Continuous Audio?, Eeyore, 2006/08/22
- Re: What is Continuous Audio?, BobG, 2006/08/22
Adjustable Carbon Attenuator, quanghoc, 2006/08/22
- Re: Adjustable Carbon Attenuator, Eeyore, 2006/08/22
- Re: Adjustable Carbon Attenuator, John Popelish, 2006/08/22
  - Re: Adjustable Carbon Attenuator, quanghoc, 2006/08/22
    - Re: Adjustable Carbon Attenuator, John Popelish, 2006/08/22
    - Re: Adjustable Carbon Attenuator, Eeyore, 2006/08/22
      
      Re: Adjustable Carbon Attenuator, Michael A. Terrell, 2006/08/23
Will this DC motor control work?, Eric R Snow, 2006/08/22
- Re: Will this DC motor control work?, ehsjr, 2006/08/22
- Re: Will this DC motor control work?, Chris, 2006/08/22
  - Re: Will this DC motor control work?, Eric R Snow, 2006/08/22
BALUN transformer for capacitive loads, archiees, 2006/08/22
- Re: BALUN transformer for capacitive loads, my.spam.maps@xxxxxxxxx, 2006/08/22
  - Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/22
    - Re: BALUN transformer for capacitive loads, archiees, 2006/08/22
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/22
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/23
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/23
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/24
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/24
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, Tim Auton, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, Tim Auton, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/25
      
      Re: BALUN transformer for capacitive loads, archiees, 2006/08/27
      
      Re: BALUN transformer for capacitive loads, John Popelish, 2006/08/27
Re: transistor help, JeffM, 2006/08/22
- Re: transistor help, jasen, 2006/08/22
Self-Resonant Frequency and Resonant Frequency, quanghoc, 2006/08/22
- Re: Self-Resonant Frequency and Resonant Frequency, w2aew, 2006/08/22
- Re: Self-Resonant Frequency and Resonant Frequency, default, 2006/08/22
- Message not available
  - Re: Self-Resonant Frequency and Resonant Frequency, quanghoc, 2006/08/22
    - Re: Self-Resonant Frequency and Resonant Frequency, Michael A. Terrell, 2006/08/22
      
      Re: Self-Resonant Frequency and Resonant Frequency, quanghoc, 2006/08/22
      
      Re: Self-Resonant Frequency and Resonant Frequency, Michael A. Terrell, 2006/08/23
Will a Gas Operated Generator Work?, mea305, 2006/08/22
- Re: Will a Gas Operated Generator Work?, Tom Biasi, 2006/08/22
- Re: Will a Gas Operated Generator Work?, ehsjr, 2006/08/22
Re: PIC18F A/D, Mark Fortune, 2006/08/21
- Re: PIC18F A/D, Randy Day, 2006/08/22
240V relay contact suppression, MarkMc, 2006/08/21
- Re: 240V relay contact suppression, Stanislaw Flatto, 2006/08/21
  - Re: 240V relay contact suppression, John Fields, 2006/08/22
    - Re: 240V relay contact suppression, Stanislaw Flatto, 2006/08/22
      
      Re: 240V relay contact suppression, Phil Allison, 2006/08/22
      
      Re: 240V relay contact suppression, default, 2006/08/22
- Re: 240V relay contact suppression, John Popelish, 2006/08/22
  - Re: 240V relay contact suppression, MarkMc, 2006/08/22
    - Re: 240V relay contact suppression, MarkMc, 2006/08/22
      
      Re: 240V relay contact suppression, John Popelish, 2006/08/22
      
      Re: 240V relay contact suppression, MarkMc, 2006/08/22
- Re: 240V relay contact suppression, Jamie, 2006/08/22
Re: A/D for end of charge detection for NIMHs & NICADs --- [OT] for Bob Masta, Mike, 2006/08/21
Schumacher Automotive Jump Stater/DC Power Source and Macerator, mea305, 2006/08/21
- Re: Schumacher Automotive Jump Stater/DC Power Source and Macerator, ehsjr, 2006/08/22
- Re: Schumacher Automotive Jump Stater/DC Power Source and Macerator, jasen, 2006/08/22
Re: A/D for end of charge detection for NIMHs & NICADs, Mike, 2006/08/21
- Re: A/D for end of charge detection for NIMHs & NICADs, Bob Myers, 2006/08/21
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Mike, 2006/08/27
    - Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Homer J Simpson, 2006/08/27
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Bob Masta, 2006/08/28
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Mike, 2006/08/29
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Bob Masta, 2006/08/29
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Mike, 2006/08/29
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Mike, 2006/08/27
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT Darwinism for Bob & Bob], Mike, 2006/08/27
- Re: A/D for end of charge detection for NIMHs & NICADs, Bob Myers, 2006/08/21
Scooter Batteries: Revisited, mea305, 2006/08/21
- Re: Scooter Batteries: Revisited, Michael A. Terrell, 2006/08/21
1234, lerameur, 2006/08/21
- Re: 1234, Mark Fortune, 2006/08/21
- Re: 1234, zack, 2006/08/22
  - Re: 1234, Homer J Simpson, 2006/08/24
Perf board types, FyberOptic, 2006/08/21
- Re: Perf board types, Homer J Simpson, 2006/08/21
- Re: Perf board types, jasen, 2006/08/21
- Re: Perf board types, Tim Auton, 2006/08/21
Tape heads, how do they work, Uriah, 2006/08/21
- Re: Tape heads, how do they work, Don Klipstein, 2006/08/21
- Re: Tape heads, how do they work, John Riley, 2006/08/21
  - Re: Tape heads, how do they work, Eeyore, 2006/08/21
    - Re: Tape heads, how do they work, John Riley, 2006/08/21
      
      Re: Tape heads, how do they work, Michael Black, 2006/08/21
      
      Re: Tape heads, how do they work, Eeyore, 2006/08/21
      
      Re: Tape heads, how do they work, Michael Black, 2006/08/21
      
      Re: Tape heads, how do they work, John O'Flaherty, 2006/08/21
      
      Re: Tape heads, how do they work, Eeyore, 2006/08/21
      
      Re: Tape heads, how do they work, Michael A. Terrell, 2006/08/21
      
      Re: Tape heads, how do they work, Eeyore, 2006/08/21
      
      Re: Tape heads, how do they work, Michael A. Terrell, 2006/08/22
      
      Re: Tape heads, how do they work, Eeyore, 2006/08/21
      
      Re: Tape heads, how do they work, Eeyore, 2006/08/21
  - Re: Tape heads, how do they work, Michael Black, 2006/08/21
- Re: Tape heads, how do they work, Rheilly Phoull, 2006/08/21
- Re: Tape heads, how do they work, Don Bruder, 2006/08/21
  - Re: Tape heads, how do they work, Jamie, 2006/08/22
- Re: Tape heads, how do they work, John O'Flaherty, 2006/08/21
- Re: Tape heads, how do they work, tlbs101, 2006/08/22
  - Re: Tape heads, how do they work, Eeyore, 2006/08/22
    - Re: Tape heads, how do they work, tlbs101, 2006/08/23
Re: A/D for end of charge detection for NIMHs & NICADs [OT] for Bob Masta or any other believer in darwinism, Mike, 2006/08/20
- Re: A/D for end of charge detection for NIMHs & NICADs [OT] for Bob Masta or any other believer in darwinism, Homer J Simpson, 2006/08/21
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT] for Bob Masta or any other believer in darwinism, Mike, 2006/08/29
    - Re: [OT] for Bob Masta or any other believer in darwinism, Homer J Simpson, 2006/08/29
      
      Re: [OT] for Bob Masta or any other believer in darwinism, Jonathan Kirwan, 2006/08/29
Measuring a Motor, Greg Hansen, 2006/08/20
- Re: Measuring a Motor, default, 2006/08/20
  - Re: Measuring a Motor, Homer J Simpson, 2006/08/21
  - Re: Measuring a Motor, Greg Hansen, 2006/08/21
- Re: Measuring a Motor, Tim Auton, 2006/08/20
- Re: Measuring a Motor, phaeton, 2006/08/20
  - Re: Measuring a Motor, default, 2006/08/21
    - Re: Measuring a Motor, phaeton, 2006/08/21
      
      Re: Measuring a Motor, default, 2006/08/22
  - Re: Measuring a Motor, Jamie, 2006/08/21
- Re: Measuring a Motor, Jamie, 2006/08/21
- Re: Measuring a Motor, Homer J Simpson, 2006/08/21
Just a question, mea305, 2006/08/20
- Re: Just a question, Tim Williams, 2006/08/20
  - Re: Just a question, Simoc, 2006/08/20
    - Re: Just a question, Tim Williams, 2006/08/21
      
      Re: Just a question, Simoc, 2006/08/22
    - Re: Just a question, Homer J Simpson, 2006/08/21
VA rating and Watt, bob, 2006/08/20
- Re: VA rating and Watt, Eeyore, 2006/08/20
- Re: VA rating and Watt, Stanislaw Flatto, 2006/08/20
- Re: VA rating and Watt, John Popelish, 2006/08/20
- Re: VA rating and Watt, Alan B, 2006/08/20
- Re: VA rating and Watt, Phil Allison, 2006/08/20
- Re: VA rating and Watt, jasen, 2006/08/21
Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Mike, 2006/08/20
- Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Rich Webb, 2006/08/20
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], PeteS, 2006/08/20
    - Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Bob Masta, 2006/08/22
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Mike, 2006/08/29
      
      Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Bob Masta, 2006/08/31
    - Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Mike, 2006/08/29
  - Re: A/D for end of charge detection for NIMHs & NICADs [OT for Bob Masta or any other believer in darwinism], Mike, 2006/08/29
Using a Device with Transformer, mea305, 2006/08/20
- Re: Using a Device with Transformer, Mr. J D, 2006/08/20
  - Re: Using a Device with Transformer, Mr. J D, 2006/08/20
  - Re: Using a Device with Transformer, mea305, 2006/08/20
    - Re: Using a Device with Transformer, Chris, 2006/08/20
  - Re: Using a Device with Transformer, mea305, 2006/08/20
    - Re: Using a Device with Transformer, Chris, 2006/08/20
      
      Re: Using a Device with Transformer, mea305, 2006/08/21
      
      Re: Using a Device with Transformer, Tim Auton, 2006/08/21
      
      Re: Using a Device with Transformer, Chris, 2006/08/21
      
      Re: Using a Device with Transformer, jasen, 2006/08/21
    - Re: Using a Device with Transformer, ehsjr, 2006/08/20
    - Re: Using a Device with Transformer, jasen, 2006/08/21
  - Re: Using a Device with Transformer, Homer J Simpson, 2006/08/21
    - Re: Using a Device with Transformer, mea305, 2006/08/21
- Re: Using a Device with Transformer, Chris, 2006/08/20
- Re: Using a Device with Transformer, Alan B, 2006/08/21
Data logger using PDA - advice needed, Pashlipops, 2006/08/20
- Re: Data logger using PDA - advice needed, Homer J Simpson, 2006/08/20
  - Re: Data logger using PDA - advice needed, Sjouke Burry, 2006/08/20
- Re: Data logger using PDA - advice needed, Jerry R, 2006/08/20
  - Re: Data logger using PDA - advice needed, Rich Webb, 2006/08/20
- Re: Data logger using PDA - advice needed, Bob Masta, 2006/08/22
two 9v ac adapter with different mA's, TheKeith, 2006/08/19
- Re: two 9v ac adapter with different mA's, Tom Biasi, 2006/08/19
  - Re: two 9v ac adapter with different mA's, Pj, 2006/08/20
    - Re: two 9v ac adapter with different mA's, Tom Biasi, 2006/08/20
      
      Re: two 9v ac adapter with different mA's, TheKeith, 2006/08/20
      
      Re: two 9v ac adapter with different mA's, Ralph Mowery, 2006/08/20
      
      Re: two 9v ac adapter with different mA's, Tom Biasi, 2006/08/20
      
      Re: two 9v ac adapter with different mA's, TheKeith, 2006/08/20
AM Demodulation using MATLAB, farah727rash, 2006/08/19
+/- supply frm single chip, aaryaluv@xxxxxxxxx, 2006/08/19
- Re: +/- supply frm single chip, Eeyore, 2006/08/19
  - Re: +/- supply frm single chip, John Fields, 2006/08/19
    - Re: +/- supply frm single chip, Eeyore, 2006/08/19
      
      Re: +/- supply frm single chip, PeteS, 2006/08/19
      
      Re: +/- supply frm single chip, John Fields, 2006/08/19
      
      Re: +/- supply frm single chip, Eeyore, 2006/08/19
- Re: +/- supply frm single chip, Chris, 2006/08/19
  - Re: +/- supply frm single chip, aaryaluv@xxxxxxxxx, 2006/08/19
    - Re: +/- supply frm single chip, John Fields, 2006/08/19
      
      Re: +/- supply frm single chip, aaryaluv@xxxxxxxxx, 2006/08/20
      
      Re: +/- supply frm single chip, PeteS, 2006/08/20
      
      Re: +/- supply frm single chip, aaryaluv@xxxxxxxxx, 2006/08/20
      
      Re: +/- supply frm single chip, John Fields, 2006/08/20
      
      Re: +/- supply frm single chip, Eeyore, 2006/08/20
      
      Re: +/- supply frm single chip, Chris, 2006/08/21
    - Re: +/- supply frm single chip, Eeyore, 2006/08/19
    - Re: +/- supply frm single chip, Chris, 2006/08/19
    - Re: +/- supply frm single chip, Tim Auton, 2006/08/19
      
      Re: +/- supply frm single chip, PeteS, 2006/08/19
      
      Re: +/- supply frm single chip, Eeyore, 2006/08/20
      
      Re: +/- supply frm single chip, Chris, 2006/08/20
      
      Re: +/- supply frm single chip, Tim Auton, 2006/08/20
- Re: +/- supply frm single chip, Jamie, 2006/08/20
  - Re: +/- supply frm single chip, Eeyore, 2006/08/20
- Re: +/- supply frm single chip, Abstract Dissonance, 2006/08/22
  - Re: +/- supply frm single chip, Eeyore, 2006/08/22
PIC assembly language beginners questions, Martin, 2006/08/18
- Re: PIC assembly language beginners questions, Jochen Rapp, 2006/08/18
- Re: PIC assembly language beginners questions, Don McKenzie, 2006/08/18
- Re: PIC assembly language beginners questions, Tim Duke, 2006/08/18
- Re: PIC assembly language beginners questions, Brian, 2006/08/19
- Re: PIC assembly language beginners questions, Anthony Fremont, 2006/08/19
- Re: PIC assembly language beginners questions, David L. Jones, 2006/08/19
How do you compare product/price?, qhoc0011, 2006/08/18
What is the Capacitor and Resistor formula to delay the turn-on, saturation, of a transistor?, Mr. J D, 2006/08/18
- Re: What is the Capacitor and Resistor formula to delay the turn-on, saturation, of a transistor?, kfel, 2006/08/18
  - Re: What is the Capacitor and Resistor formula to delay the turn-on, saturation, of a transistor?, John Fields, 2006/08/18
  - Re: What is the Capacitor and Resistor formula to delay the turn-on, saturation, of a transistor?, William Hightower, 2006/08/18
How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Mr. J D, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Phil Allison, 2006/08/18
  - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Mr. J D, 2006/08/18
    - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Phil Allison, 2006/08/18
    - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., mc, 2006/08/18
    - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Robert Baer, 2006/08/18
    - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Eeyore, 2006/08/18
      
      Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., John Fields, 2006/08/18
  - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Robert Baer, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Chris, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Ben Jackson, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., colin, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., John Popelish, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., mc, 2006/08/18
- Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Robert Baer, 2006/08/18
  - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Mr. J D, 2006/08/19
    - Re: How many mA are required for a LOW and HIGH signal on a digital CMOS gate., Don Bowey, 2006/08/19
RF, scbalachandran@xxxxxxxxx, 2006/08/18
- Re: RF, Don Bowey, 2006/08/18
- Re: RF, Michael Black, 2006/08/18
- Re: RF, Chris, 2006/08/18
  - Re: RF, colin, 2006/08/19
- Re: RF, Pj, 2006/08/18
Use of power product with power source, mea305, 2006/08/18
- Re: Use of power product with power source, Michael A. Terrell, 2006/08/18
- Re: Use of power product with power source, Ralph Mowery, 2006/08/18
- Re: Use of power product with power source, Abstract Dissonance, 2006/08/18
- Re: Use of power product with power source, DJ Delorie, 2006/08/18
- Re: Use of power product with power source, jasen, 2006/08/18
Used Cisco Used Cisco Router Used Cisco Switch At LinkWaves Corp, LinkWaves, 2006/08/18
minimum size?, garrethhume, 2006/08/17
- Re: minimum size?, John O'Flaherty, 2006/08/17
  - Re: minimum size?, raphfrk, 2006/08/18
    - Re: minimum size?, Henry, 2006/08/18
    - Re: minimum size?, Henry, 2006/08/18
thanks, randomname, 2006/08/17
foot switch/throttle for scooter motor control?, John Doe, 2006/08/17
- Re: foot switch/throttle for scooter motor control?, Mark Fortune, 2006/08/17
NOR Gate Question, Bart, 2006/08/17
- Re: NOR Gate Question, Eeyore, 2006/08/17
- Re: NOR Gate Question, John Popelish, 2006/08/17
  - Re: NOR Gate Question, Bart, 2006/08/17
    - Re: NOR Gate Question, stratus46, 2006/08/17
    - Re: NOR Gate Question, DJ Delorie, 2006/08/17
    - Re: NOR Gate Question, John Popelish, 2006/08/17
    - Re: NOR Gate Question, Alan B, 2006/08/17
- Re: NOR Gate Question, Alan B, 2006/08/17
- Re: NOR Gate Question, DJ Delorie, 2006/08/17
- Re: NOR Gate Question, ishaqe, 2006/08/17
- Re: NOR Gate Question, q_q_anonymous, 2006/08/20
  - Re: NOR Gate Question, Jerry R, 2006/08/20
    - Re: NOR Gate Question, q_q_anonymous, 2006/08/21
  - Re: NOR Gate Question, Alan B, 2006/08/21
    - Re: NOR Gate Question, q_q_anonymous, 2006/08/21
      
      Re: NOR Gate Question, Don Klipstein, 2006/08/21
      
      Re: NOR Gate Question, q_q_anonymous, 2006/08/21
      
      Re: NOR Gate Question, PeteS, 2006/08/21
Trouble With A Very Simple MOSFET Amplifier, /dev/phaeton, 2006/08/17
- Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/17
  - Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/17
    - Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, phaeton, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Michael A. Terrell, 2006/08/19
      
      Re: Trouble With A Very Simple MOSFET Amplifier, phaeton, 2006/08/20
      
      Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/22
      
      Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/20
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/21
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Michael A. Terrell, 2006/08/21
      
      Re: Trouble With A Very Simple MOSFET Amplifier, DJ Delorie, 2006/08/18
- Re: Trouble With A Very Simple MOSFET Amplifier, DJ Delorie, 2006/08/17
- Re: Trouble With A Very Simple MOSFET Amplifier, Ben Jackson, 2006/08/17
- Re: Trouble With A Very Simple MOSFET Amplifier, phaeton, 2006/08/17
  - Re: Trouble With A Very Simple MOSFET Amplifier, Ben Jackson, 2006/08/17
  - Re: Trouble With A Very Simple MOSFET Amplifier, DJ Delorie, 2006/08/17
    - Re: Trouble With A Very Simple MOSFET Amplifier, Phil Allison, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, DJ Delorie, 2006/08/18
      
      Re: Trouble With A Very Simple MOSFET Amplifier, Don Bowey, 2006/08/18
  - Re: Trouble With A Very Simple MOSFET Amplifier, John O'Flaherty, 2006/08/19
- Re: Trouble With A Very Simple MOSFET Amplifier, default, 2006/08/17
Zero Ohms = Mathematically Incorrect, Radium, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Radium, 2006/08/17
    - Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, laodao, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/17
    - Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Jim, 2006/08/21
- Re: Zero Ohms = Mathematically Incorrect, Bob Eld, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Chris, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Puckdropper, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Phil Allison, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, DJ Delorie, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Bill Bowden, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, DJ Delorie, 2006/08/17
    - Re: Zero Ohms = Mathematically Incorrect, Bill Bowden, 2006/08/18
  - Re: Zero Ohms = Mathematically Incorrect, Greg Neill, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, Abstract Dissonance, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Mike Warren, 2006/08/17
    - Re: Zero Ohms = Mathematically Incorrect, Abstract Dissonance, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Phil Allison, 2006/08/17
    - Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, DJ Delorie, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, Bob Myers, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Phil Allison, 2006/08/17
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Greg Hansen, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Phil Allison, 2006/08/17
- Re: Zero Ohms = Mathematically Incorrect, Catch-22, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, chuck, 2006/08/17
  - Re: Zero Ohms = Mathematically Incorrect, Abstract Dissonance, 2006/08/18
    - Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
    - Re: Zero Ohms = Mathematically Incorrect, David L. Jones, 2006/08/18
    - Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/18
    - Re: Zero Ohms = Mathematically Incorrect, Greg Hansen, 2006/08/19
      
      Re: Zero Ohms = Mathematically Incorrect, PeteS, 2006/08/19
  - Re: Zero Ohms = Mathematically Incorrect, Catch-22, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, David L. Jones, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, Stanislaw Flatto, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
  - Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
    - Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Alan B, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, Abstract Dissonance, 2006/08/18
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/22
      
      Re: Zero Ohms = Mathematically Incorrect, Homer J Simpson, 2006/08/24
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/24
- Re: Zero Ohms = Mathematically Incorrect, ccon67, 2006/08/18
- Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/19
  - Re: Zero Ohms = Mathematically Incorrect, chuck, 2006/08/19
  - Re: Zero Ohms = Mathematically Incorrect, G. Schindler, 2006/08/20
    - Re: Zero Ohms = Mathematically Incorrect, Homer J Simpson, 2006/08/21
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/22
      
      Re: Zero Ohms = Mathematically Incorrect, Bill Bowden, 2006/08/23
      
      Re: Zero Ohms = Mathematically Incorrect, Mark Fortune, 2006/08/23
      
      Re: Zero Ohms = Mathematically Incorrect, G. Schindler, 2006/08/24
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/23
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/25
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/25
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/25
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/25
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/25
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/27
      
      Message not available
      Message not available
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/28
      
      Message not available
      Message not available
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/28
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/28
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/28
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, Bill Bowden, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, Mark Fortune, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, Bill Bowden, 2006/08/28
      
      Re: Zero Ohms = Mathematically Incorrect, Homer J Simpson, 2006/08/28
      
      Re: Zero Ohms = Mathematically Incorrect, John Fields, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, jasen, 2006/08/26
      
      Re: Zero Ohms = Mathematically Incorrect, Greg Hansen, 2006/08/23
      
      Re: Zero Ohms = Mathematically Incorrect, G. Schindler, 2006/08/24
      
      Re: Zero Ohms = Mathematically Incorrect, John Larkin, 2006/08/27
Current measurements from a computer, MIke Brown, 2006/08/17
- Re: Current measurements from a computer, Alan B, 2006/08/17
- Message not available
  - Re: Current measurements from a computer, Alan B, 2006/08/17
- Re: Current measurements from a computer, Chris, 2006/08/17
- Re: Current measurements from a computer, Bob Masta, 2006/08/17
- Message not available
  - Re: Current measurements from a computer, q_q_anonymous, 2006/08/20
LED's for dummies, hepstyle, 2006/08/16
- Re: LED's for dummies, PeteS, 2006/08/16
- Re: LED's for dummies, Chris, 2006/08/16
- Re: LED's for dummies, Alan B, 2006/08/17
  - Re: LED's for dummies, hepstyle, 2006/08/17
    - Re: LED's for dummies, redbelly, 2006/08/17
- Re: LED's for dummies, jasen, 2006/08/17
- Re: LED's for dummies, ehsjr, 2006/08/20
  - Re: LED's for dummies, Homer J Simpson, 2006/08/21
    - Re: LED's for dummies, hepstyle, 2006/08/22
Can electricity flow through air w/out sparking?, Radium, 2006/08/16
- Re: Can electricity flow through air w/out sparking?, The Ghost, 2006/08/16
- Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/16
  - Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/16
    - Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, jasen, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Salmon Egg, 2006/08/17
  - Re: Can electricity flow through air w/out sparking?, Mike Rieves, 2006/08/16
    - Re: Can electricity flow through air w/out sparking?, The Ghost, 2006/08/17
- Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
  - Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, DJ Delorie, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Michael A. Terrell, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, jasen, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, me, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Angelo Campanella, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Fleetie, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Ron Capik, 2006/08/18
    - Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/17
- Re: Can electricity flow through air w/out sparking? KEEP FEEDING THE RADIUM TROLL, The Ghost, 2006/08/17
- Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
  - Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
- Re: Can electricity flow through air w/out sparking?, notbob, 2006/08/17
  - Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, notbob, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/17
- Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/17
  - Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/17
    - Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Mike Rieves, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, love&kisses, 2006/08/28
      
      Re: Can electricity flow through air w/out sparking?, redbelly, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Michael A. Terrell, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/17
      
      Re: Can electricity flow through air w/out sparking?, Michael A. Terrell, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Michael A. Terrell, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/18
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/19
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Pj, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/20
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Don Klipstein, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/23
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/21
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/23
      
      Re: Can electricity flow through air w/out sparking?, Greg Hansen, 2006/08/23
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/27
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/23
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/27
      
      Re: Can electricity flow through air w/out sparking?, redbelly, 2006/08/27
      
      Re: Can electricity flow through air w/out sparking?, Bob Myers, 2006/08/28
      
      Re: Can electricity flow through air w/out sparking?, Sharon Lourduraj, 2006/08/30
      
      Re: Can electricity flow through air w/out sparking?, Eeyore, 2006/08/30
      
      Re: Can electricity flow through air w/out sparking?, Michael A. Terrell, 2006/08/30
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/23
      
      Re: Can electricity flow through air w/out sparking?, Alan B, 2006/08/23
- Re: Can electricity flow through air w/out sparking?, EskWIRED, 2006/08/30
  - Re: Can electricity flow through air w/out sparking?, Radium, 2006/08/30
    - Re: Can electricity flow through air w/out sparking?, Andrew Reilly, 2006/08/31
    - Re: Can electricity flow through air w/out sparking?, EskWIRED, 2006/08/31
      
      Re: Can electricity flow through air w/out sparking?, mike . j . harvey, 2006/08/31
  - Re: Can electricity flow through air w/out sparking?, Angelo Campanella, 2006/08/31
Quick Simple Answer: The Output of an SR Flip Flop Is One Only If Both Inputs Are Zero, Christopher Lusardi, 2006/08/16
- Re: Quick Simple Answer: The Output of an SR Flip Flop Is One Only If Both Inputs Are Zero, Alan B, 2006/08/17
Motor Drivers vs Motor Controllers, quanghoc, 2006/08/16
- Re: Motor Drivers vs Motor Controllers, Chris, 2006/08/16
  - Re: Motor Drivers vs Motor Controllers, quanghoc, 2006/08/16
gold plated, mike7411, 2006/08/16
- Re: gold plated, John Popelish, 2006/08/16
  - Re: gold plated, PeteS, 2006/08/16
    - Re: gold plated, Jamie, 2006/08/17
  - Re: gold plated, Chris, 2006/08/16
Are you qualified engineer? Job Offers, admin, 2006/08/16
- Re: Are you qualified engineer? Job Offers, Alan B, 2006/08/17
measuring amps on my computer's power supply with a multimeter, q_q_anonymous, 2006/08/16
- Re: measuring amps on my computer's power supply with a multimeter, Chris, 2006/08/16
  - Re: measuring amps on my computer's power supply with a multimeter, q_q_anonymous, 2006/08/16
    - Re: measuring amps on my computer's power supply with a multimeter, Chris, 2006/08/16
    - Re: measuring amps on my computer's power supply with a multimeter, Chris, 2006/08/16
- Re: measuring amps on my computer's power supply with a multimeter, Bob Masta, 2006/08/17
residential voltage sensors to pic components, tyler, 2006/08/16
- Re: residential voltage sensors to pic components, Chris, 2006/08/16
  - Re: residential voltage sensors to pic components, John Riley, 2006/08/16
    - Re: residential voltage sensors to pic components, John, 2006/08/16
  - Re: residential voltage sensors to pic components, tyler, 2006/08/16
    - Re: residential voltage sensors to pic components, Chris, 2006/08/16
- Re: residential voltage sensors to pic components, jasen, 2006/08/17
DC motor speed controller necessary?, John Doe, 2006/08/16
- Re: DC motor speed controller necessary?, Phil Allison, 2006/08/16
- Re: DC motor speed controller necessary?, Chris, 2006/08/16
- Re: DC motor speed controller necessary?, John Riley, 2006/08/16
  - Re: DC motor speed controller necessary?, John Doe, 2006/08/16
    - Re: DC motor speed controller necessary?, John Riley, 2006/08/16
- Re: DC motor speed controller necessary?, Bob Masta, 2006/08/16
  - Re: DC motor speed controller necessary?, John Riley, 2006/08/16
    - Re: DC motor speed controller necessary?, John Doe, 2006/08/16
      
      Re: DC motor speed controller necessary?, John Riley, 2006/08/16
555 timer: why won't this work, randomname12345, 2006/08/15
- Re: 555 timer: why won't this work, Tom Biasi, 2006/08/15
  - Re: 555 timer: why won't this work, Rich Grise, 2006/08/15
    - Re: 555 timer: why won't this work, Tom Biasi, 2006/08/15
  - Re: 555 timer: why won't this work, Eeyore, 2006/08/15
  - Re: 555 timer: why won't this work, Michael Black, 2006/08/15
- Re: 555 timer: why won't this work, Tim Auton, 2006/08/15
- Re: 555 timer: why won't this work, John Fields, 2006/08/16
- Re: 555 timer: why won't this work, Bob Eld, 2006/08/16
- Re: 555 timer: why won't this work, me, 2006/08/16
- Re: 555 timer: why won't this work, nitin, 2006/08/16
  - Re: 555 timer: why won't this work, nitin, 2006/08/16
motor drivers, quanghoc, 2006/08/15
- Re: motor drivers, BobG, 2006/08/15
  - Re: motor drivers, quanghoc, 2006/08/16
    - Re: motor drivers, BobG, 2006/08/16
      
      Re: motor drivers, quanghoc, 2006/08/16
      
      Re: motor drivers, BobG, 2006/08/16
      
      Re: motor drivers, quanghoc, 2006/08/16
      
      Re: motor drivers, BobG, 2006/08/16
Dell's first attempt to market perpetual motion, The Flavored Coffee Guy, 2006/08/15
- Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/15
- Re: Dell's first attempt to market perpetual motion, Mark Fortune, 2006/08/15
  - Re: Dell's first attempt to market perpetual motion, The Flavored Coffee Guy, 2006/08/17
    - Re: Dell's first attempt to market perpetual motion, lsmartino, 2006/08/17
      
      Re: Dell's first attempt to market perpetual motion, The Flavored Coffee Guy, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, Bob Myers, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, lsmartino, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, NN, 2006/08/21
      
      Re: Dell's first attempt to market perpetual motion, The Flavored Coffee Guy, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, Bob Myers, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, James Sweet, 2006/08/19
      
      Re: Dell's first attempt to market perpetual motion, Bob Myers, 2006/08/19
      
      Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/19
      
      Re: Dell's first attempt to market perpetual motion, Bob Myers, 2006/08/20
      
      Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/20
      
      Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, Matthew Beasley, 2006/08/18
    - Re: Dell's first attempt to market perpetual motion, Eeyore, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, 2000man, 2006/08/18
      
      Re: Dell's first attempt to market perpetual motion, Bill Ghrist, 2006/08/18
    - Re: Dell's first attempt to market perpetual motion, Alan B, 2006/08/18
- Re: Dell's first attempt to market perpetual motion, Alan B, 2006/08/16
  - Re: Dell's first attempt to market perpetual motion, Michael A. Terrell, 2006/08/16
- Re: Dell's first attempt to market perpetual motion, cornytheclown, 2006/08/20
  - Re: Dell's first attempt to market perpetual motion, Homer J Simpson, 2006/08/20
  - Re: Dell's first attempt to market perpetual motion, jasen, 2006/08/21
  - Re: Dell's first attempt to market perpetual motion, Michael A. Terrell, 2006/08/21
Digital Monostable, cooldude, 2006/08/15
- Re: Digital Monostable, John Fields, 2006/08/15
power on delay using a 555 chip, kfel, 2006/08/15
- Re: power on delay using a 555 chip, Tom Biasi, 2006/08/15
  - Re: power on delay using a 555 chip, kfel, 2006/08/15
    - Re: power on delay using a 555 chip, default, 2006/08/15
    - Re: power on delay using a 555 chip, John Fields, 2006/08/15
      
      Re: power on delay using a 555 chip, kfel, 2006/08/15
      
      Re: power on delay using a 555 chip, John Fields, 2006/08/15
      
      Re: power on delay using a 555 chip, kfel, 2006/08/15
- Re: power on delay using a 555 chip, Chris, 2006/08/15
  - Re: power on delay using a 555 chip, kfel, 2006/08/15
    - Re: power on delay using a 555 chip, Chris, 2006/08/15
      
      Re: power on delay using a 555 chip, kfel, 2006/08/18
      
      Re: power on delay using a 555 chip, John Fields, 2006/08/18
      
      Re: power on delay using a 555 chip, Chris, 2006/08/19
      
      Re: power on delay using a 555 chip, kfel, 2006/08/19
      
      Re: power on delay using a 555 chip, Chris, 2006/08/19
Ammeter, John Riley, 2006/08/15
- Re: Ammeter, Phil Allison, 2006/08/15
  - Re: Ammeter, John Riley, 2006/08/15
    - Re: Ammeter, Phil Allison, 2006/08/15
- Re: Ammeter, Rich Grise, 2006/08/15
555 timer, randomname12345, 2006/08/15
- Re: 555 timer, Puckdropper, 2006/08/15
  - Re: 555 timer, randomname12345, 2006/08/15
    - Re: 555 timer, Billbo, 2006/08/15
    - Re: 555 timer, jasen, 2006/08/16
- Re: 555 timer, John Fields, 2006/08/15
  - Re: 555 timer, randomname12345, 2006/08/15
    - Re: 555 timer, Michael Black, 2006/08/15
      
      Re: 555 timer, randomname12345, 2006/08/15
      
      Re: 555 timer, Rich Grise, 2006/08/15
      
      Re: 555 timer, randomname12345, 2006/08/17
      
      Re: 555 timer, jasen, 2006/08/17
    - Re: 555 timer, John Fields, 2006/08/15
    - Re: 555 timer, Rich Grise, 2006/08/15
    - Re: 555 timer, jasen, 2006/08/17
- Re: 555 timer, default, 2006/08/15
  - Re: 555 timer, jasen, 2006/08/16
    - Re: 555 timer, default, 2006/08/16
      
      Re: 555 timer, jasen, 2006/08/17
      
      Re: 555 timer, default, 2006/08/17
      
      Re: 555 timer, John Fields, 2006/08/17
      
      Re: 555 timer, jasen, 2006/08/18
    - Re: 555 timer, default, 2006/08/16
- Re: 555 timer, notbob, 2006/08/15
  - Re: 555 timer, notbob, 2006/08/15
- Re: 555 timer, Bill Bowden, 2006/08/15
Interface device, Josh916, 2006/08/15
- Re: Interface device, Rich Grise, 2006/08/15
- Re: Interface device, jasen, 2006/08/16
The difference between using one 555 timer and a 556 timer for PWM control, Mr. J D, 2006/08/15
- Re: The difference between using one 555 timer and a 556 timer for PWM control, BobG, 2006/08/15
  - Re: The difference between using one 555 timer and a 556 timer for PWM control, James Thompson, 2006/08/15
- Re: The difference between using one 555 timer and a 556 timer for PWM control, Rich Grise, 2006/08/15
- Re: The difference between using one 555 timer and a 556 timer for PWM control, John Fields, 2006/08/16
  - Re: The difference between using one 555 timer and a 556 timer for PWM control, Mark Fortune, 2006/08/16
    - Re: The difference between using one 555 timer and a 556 timer for PWM control, John Fields, 2006/08/16
      
      Re: The difference between using one 555 timer and a 556 timer for PWM control, Mark Fortune, 2006/08/16
      
      Re: The difference between using one 555 timer and a 556 timer for PWM control, jasen, 2006/08/17
NiMH battery pack, John Riley, 2006/08/15
- Re: NiMH battery pack, Puckdropper, 2006/08/15
  - Re: NiMH battery pack, John Riley, 2006/08/15
    - Re: NiMH battery pack, Phil Allison, 2006/08/15
      
      Re: NiMH battery pack, John Riley, 2006/08/15
      
      Re: NiMH battery pack, John Riley, 2006/08/15
      
      Re: NiMH battery pack, Rich Grise, 2006/08/15
      
      Re: NiMH battery pack, John Riley, 2006/08/16
      
      Re: NiMH battery pack, John Riley, 2006/08/16
      
      Re: NiMH battery pack, sonnyhung, 2006/08/18
      
      Re: NiMH battery pack, Eeyore, 2006/08/18
Crystals vs Oscillators vs Resonators, quanghoc, 2006/08/15
- Re: Crystals vs Oscillators vs Resonators, David L. Jones, 2006/08/15
  - Re: Crystals vs Oscillators vs Resonators, quanghoc, 2006/08/15
    - Re: Crystals vs Oscillators vs Resonators, Rich Grise, 2006/08/15
    - Re: Crystals vs Oscillators vs Resonators, David L. Jones, 2006/08/15
      
      Re: Crystals vs Oscillators vs Resonators, qhoc0011, 2006/08/18
      
      Re: Crystals vs Oscillators vs Resonators, John Fields, 2006/08/18
      
      Re: Crystals vs Oscillators vs Resonators, qhoc0011, 2006/08/18
      
      Re: Crystals vs Oscillators vs Resonators, Tim Auton, 2006/08/18
      
      Re: Crystals vs Oscillators vs Resonators, John Fields, 2006/08/18
      
      Re: Crystals vs Oscillators vs Resonators, Michael Black, 2006/08/19
- Re: Crystals vs Oscillators vs Resonators, Chris, 2006/08/15
Stranding?, quanghoc, 2006/08/15
- Re: Stranding?, Don Bruder, 2006/08/15
- Re: Stranding?, DJ Delorie, 2006/08/15
  - Re: Stranding?, quanghoc, 2006/08/15
    - Re: Stranding?, DJ Delorie, 2006/08/15
      
      Re: Stranding?, Michael A. Terrell, 2006/08/15
      
      Re: Stranding?, John Riley, 2006/08/15
      
      Re: Stranding?, Rich Grise, 2006/08/15
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Michael A. Terrell, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Michael A. Terrell, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/17
      
      Re: Stranding?, Don Bruder, 2006/08/16
      
      Re: Stranding?, jasen, 2006/08/17
      
      Re: Stranding?, Michael A. Terrell, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Michael A. Terrell, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Don Bruder, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/18
      
      Re: Stranding?, Alan B, 2006/08/17
      
      Re: Stranding?, John Riley, 2006/08/18
      
      Re: Stranding?, John Riley, 2006/08/15
      
      Re: Stranding?, Rich Grise, 2006/08/15
      
      Re: Stranding?, DJ Delorie, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/16
      
      Re: Stranding?, John Riley, 2006/08/16
      
      Re: Stranding?, Alan B, 2006/08/17
      
      Re: Stranding?, John Riley, 2006/08/18
      
      Re: Stranding?, Alan B, 2006/08/21
    - Re: Stranding?, jasen, 2006/08/15
- Re: Stranding?, John Fields, 2006/08/15
- Re: Stranding?, John Popelish, 2006/08/15
  - Re: Stranding?, quanghoc, 2006/08/15
when Rja is not known, TO-126, gobo20, 2006/08/14
- Re: when Rja is not known, TO-126, Eeyore, 2006/08/16
measuring a reference signal, mike7411, 2006/08/14
- Re: measuring a reference signal, Michael A. Terrell, 2006/08/15
- Re: measuring a reference signal, Phil Allison, 2006/08/15
- Re: measuring a reference signal, David L. Jones, 2006/08/15
Small headphone amplifier, Bruce W.1, 2006/08/14
Comparing the frequencies of two slow reference clocks, arant, 2006/08/14
- Re: Comparing the frequencies of two slow reference clocks, Bob Masta, 2006/08/15
Capacitor orientation, lmcgill, 2006/08/14
- Re: Capacitor orientation, Bob Myers, 2006/08/14
  - Re: Capacitor orientation, Sjouke Burry, 2006/08/14
    - Re: Capacitor orientation, Tim Williams, 2006/08/15
- Re: Capacitor orientation, John Fields, 2006/08/15
- Re: Capacitor orientation, Rich Grise, 2006/08/15
Can I connect an LED to an RS232 port?, johnfofawn, 2006/08/14
- Re: Can I connect an LED to an RS232 port?, Eeyore, 2006/08/14
- Re: Can I connect an LED to an RS232 port?, Tim Auton, 2006/08/14
  - Re: Can I connect an LED to an RS232 port?, Mark Fortune, 2006/08/14
  - Re: Can I connect an LED to an RS232 port?, Eeyore, 2006/08/14
    - Re: Can I connect an LED to an RS232 port?, Don McKenzie, 2006/08/14
- Re: Can I connect an LED to an RS232 port?, jasen, 2006/08/15
  - Re: Can I connect an LED to an RS232 port?, johnfofawn, 2006/08/16
    - Re: Can I connect an LED to an RS232 port?, Michael Black, 2006/08/16
One Light, Two Supplies, No. 1 Novice, 2006/08/14
- Re: One Light, Two Supplies, Tom Biasi, 2006/08/14
- Re: One Light, Two Supplies, default, 2006/08/14
  - Re: One Light, Two Supplies, No. 1 Novice, 2006/08/14
    - Re: One Light, Two Supplies, Tom Biasi, 2006/08/14
      
      Re: One Light, Two Supplies, No. 1 Novice, 2006/08/15
      
      Re: One Light, Two Supplies, Tom Biasi, 2006/08/15
      
      Re: One Light, Two Supplies, No. 1 Novice, 2006/08/16
      
      Re: One Light, Two Supplies, Tom Biasi, 2006/08/16
    - Re: One Light, Two Supplies, default, 2006/08/14
    - Re: One Light, Two Supplies, jasen, 2006/08/15
can I make my garden solar lights bline, Linda, 2006/08/14
- Re: can I make my garden solar lights bline, jasen, 2006/08/14
- Re: can I make my garden solar lights bline, Rheilly Phoull, 2006/08/14
- Re: can I make my garden solar lights bline, default, 2006/08/14
help please - battery confusion w cb612 rechargable battery, dna_alexov, 2006/08/13
- Re: help please - battery confusion w cb612 rechargable battery, Tim Auton, 2006/08/13
- Re: help please - battery confusion w cb612 rechargable battery, John Riley, 2006/08/15
Scope GPIB stuff, Melodolic, 2006/08/13
- Re: Scope GPIB stuff, John Fields, 2006/08/13
  - Re: Scope GPIB stuff, Melodolic, 2006/08/13
    - Re: Scope GPIB stuff, Rich Webb, 2006/08/13
      
      Re: Scope GPIB stuff, Melodolic, 2006/08/13
    - Re: Scope GPIB stuff, Dave Dunfield, 2006/08/26
      
      Re: Scope GPIB stuff, Melodolic, 2006/08/29
- Re: Scope GPIB stuff, David L. Jones, 2006/08/14
Question about re-charging batteries, mea305, 2006/08/12
- Re: Question about re-charging batteries, Stanislaw Flatto, 2006/08/13
- Re: Question about re-charging batteries, jasen, 2006/08/13
Question re. shunts to measure amperage, Wayne Lundberg, 2006/08/12
- Re: Question re. shunts to measure amperage, Eeyore, 2006/08/12
  - Re: Question re. shunts to measure amperage, Wayne Lundberg, 2006/08/12
- Re: Question re. shunts to measure amperage, Chris, 2006/08/12
  - Re: Question re. shunts to measure amperage, Wayne Lundberg, 2006/08/12
    - Re: Question re. shunts to measure amperage, Chris, 2006/08/13
    - Re: Question re. shunts to measure amperage, Chris, 2006/08/13
      
      Re: Question re. shunts to measure amperage, Wayne Lundberg, 2006/08/13
- Re: Question re. shunts to measure amperage, jasen, 2006/08/13
Two Networked Computers Go Down Together, W. Watson, 2006/08/12
small ir remote control question, nitin, 2006/08/12
- Re: small ir remote control question, default, 2006/08/12
- Re: small ir remote control question, Michael Black, 2006/08/12
- Re: small ir remote control question, jasen, 2006/08/13
Question about CMOS outputs, Bill Bowden, 2006/08/12
- Re: Question about CMOS outputs, John O'Flaherty, 2006/08/12
  - Re: Question about CMOS outputs, Bill Bowden, 2006/08/13
- Re: Question about CMOS outputs, JedOs86, 2006/08/12
How to pick the right transistor?, JedOs86, 2006/08/12
- Message not available
  - Re: How to pick the right transistor?, JedOs86, 2006/08/12
    - Re: How to pick the right transistor?, default, 2006/08/12
    - Re: How to pick the right transistor?, John Popelish, 2006/08/12
    - Re: How to pick the right transistor?, Eeyore, 2006/08/12
- Re: How to pick the right transistor?, default, 2006/08/12
  - Re: How to pick the right transistor?, JedOs86, 2006/08/12
    - Re: How to pick the right transistor?, Jonathan Kirwan, 2006/08/12
      
      Re: How to pick the right transistor?, JedOs86, 2006/08/13
      
      Re: How to pick the right transistor?, John Popelish, 2006/08/13
    - Re: How to pick the right transistor?, default, 2006/08/12
- Re: How to pick the right transistor?, Michael Black, 2006/08/12
power outlet shapes, jjoensuu, 2006/08/12
- Re: power outlet shapes, JedOs86, 2006/08/12
  - Re: power outlet shapes, JedOs86, 2006/08/12
  - Re: power outlet shapes, Michael A. Terrell, 2006/08/12
- Re: power outlet shapes, Chris, 2006/08/12
- Re: power outlet shapes, JedOs86, 2006/08/12
  - Re: power outlet shapes, Michael A. Terrell, 2006/08/12
    - Re: power outlet shapes, Rich Grise, 2006/08/12
  - Re: power outlet shapes, Alan B, 2006/08/12
Need help driving two IPS1031 Low-Side MOSFETs from a PIC, JedOs86, 2006/08/12
- Re: Need help driving two IPS1031 Low-Side MOSFETs from a PIC, JedOs86, 2006/08/12
  - Re: Need help driving two IPS1031 Low-Side MOSFETs from a PIC, Chris, 2006/08/12
Re: what is the joule rating on surge protectors?, John Fields, 2006/08/12
- Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/12
  - Re: what is the joule rating on surge protectors?, w_tom, 2006/08/12
    - Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/12
      
      Re: what is the joule rating on surge protectors?, John Fields, 2006/08/12
      
      Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/12
      
      Re: what is the joule rating on surge protectors?, John Popelish, 2006/08/12
      
      Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/12
      
      Re: what is the joule rating on surge protectors?, John Popelish, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, John Popelish, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, Sjouke Burry, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, John Popelish, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, Rich Grise, 2006/08/15
      
      Message not available
      
      Re: what is the joule rating on surge protectors?, bud--, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, John Fields, 2006/08/14
      
      Message not available
      
      Re: what is the joule rating on surge protectors?, Rich Grise, 2006/08/15
      
      Re: what is the joule rating on surge protectors?, w_tom, 2006/08/13
      
      Re: what is the joule rating on surge protectors?, John Larkin, 2006/08/14
      
      Re: what is the joule rating on surge protectors?, w_tom, 2006/08/14
    - Re: what is the joule rating on surge protectors?, John Fields, 2006/08/12
Lead pitch?, quanghoc, 2006/08/11
- Re: Lead pitch?, PeteS, 2006/08/11
  - Re: Lead pitch?, quanghoc, 2006/08/12
    - Re: Lead pitch?, Phil Allison, 2006/08/12
    - Re: Lead pitch?, Rich Grise, 2006/08/12
      
      Re: Lead pitch?, DJ Delorie, 2006/08/12
      
      Re: Lead pitch?, Phil Allison, 2006/08/12
      
      Re: Lead pitch?, John Fields, 2006/08/12
      
      Re: Lead pitch?, quanghoc, 2006/08/14
      
      Re: Lead pitch?, Michael Black, 2006/08/14
- Re: Lead pitch?, jasen, 2006/08/12
What is Capacitance X,Y?, quanghoc, 2006/08/11
- Re: What is Capacitance X,Y?, Eeyore, 2006/08/11
  - Re: What is Capacitance X,Y?, quanghoc, 2006/08/12
    - Re: What is Capacitance X,Y?, Phil Allison, 2006/08/12
    - Re: What is Capacitance X,Y?, John Fields, 2006/08/12
- Re: What is Capacitance X,Y?, Phil Allison, 2006/08/12
- Re: What is Capacitance X,Y?, Dorian McIntire, 2006/08/12
  - Re: What is Capacitance X,Y?, Phil Allison, 2006/08/12
    - Re: What is Capacitance X,Y?, Dorian McIntire, 2006/08/12
yyttrr, steve4annie, 2006/08/11
- Re: yyttrr, Don Bowey, 2006/08/12
  - Re: yyttrr, Alan B, 2006/08/12
    - Re: yyttrr, Dorian McIntire, 2006/08/12
      
      Message not available
      
      Re: yyttrr, Puckdropper, 2006/08/13
testring, funtime1, 2006/08/11
- Re: testring, Don Bowey, 2006/08/12
hi test, stephen balstone, 2006/08/11
- Re: hi test, Mark Fortune, 2006/08/11
- Re: hi test, Rich Grise, 2006/08/12
Thanks to all, mea305, 2006/08/11
- Re: Thanks to all, Rich Grise, 2006/08/12
  - Re: Thanks to all, mea305, 2006/08/13
How do I test my ac/dc adaptor?, squeeky_george, 2006/08/11
- Re: How do I test my ac/dc adaptor?, Peter M. Groen, 2006/08/11
- Re: How do I test my ac/dc adaptor?, John Ferrell, 2006/08/11
Collector to Base Resistor - Why?, Lumpy, 2006/08/11
- Re: Collector to Base Resistor - Why?, Eeyore, 2006/08/11
  - Message not available
    - Re: Collector to Base Resistor - Why?, Eeyore, 2006/08/11
  - Re: Collector to Base Resistor - Why?, James Beck, 2006/08/11
    - Re: Collector to Base Resistor - Why?, Peter M. Groen, 2006/08/11
      
      Re: Collector to Base Resistor - Why?, James Beck, 2006/08/11
      
      Re: Collector to Base Resistor - Why?, Rich Grise, 2006/08/12
      
      Re: Collector to Base Resistor - Why?, Richard Seriani, Sr., 2006/08/11
      
      Re: Collector to Base Resistor - Why?, Stanislaw Flatto, 2006/08/12
      
      Re: Collector to Base Resistor - Why?, Lumpy, 2006/08/11
      
      Re: Collector to Base Resistor - Why?, Rich Grise, 2006/08/12
    - Re: Collector to Base Resistor - Why?, Eeyore, 2006/08/11
      
      Re: Collector to Base Resistor - Why?, Michael A. Terrell, 2006/08/11
    - Message not available
      
      Message not available
      
      Message not available
      
      Message not available
      
      Re: Collector to Base Resistor - Why?, Lumpy, 2006/08/12
      
      Re: Collector to Base Resistor - Why?, Michael A. Terrell, 2006/08/12
      
      Re: Collector to Base Resistor - Why?, Eeyore, 2006/08/12
      
      Re: Collector to Base Resistor - Why?, JedOs86, 2006/08/13
- Re: Collector to Base Resistor - Why?, Bob Eld, 2006/08/11
  - Re: Collector to Base Resistor - Why?, Lumpy, 2006/08/11
- Re: Collector to Base Resistor - Why?, John Popelish, 2006/08/11
  - Re: Collector to Base Resistor - Why?, Lumpy, 2006/08/11
    - Re: Collector to Base Resistor - Why?, John Popelish, 2006/08/11
- Re: Collector to Base Resistor - Why?, jasen, 2006/08/12
- Re: Collector to Base Resistor - Why?, Jonathan Kirwan, 2006/08/12
Can I, Triblesix, 2006/08/11
- Re: Can I, Blake, 2006/08/12
  - Re: Can I, Triblesix, 2006/08/14
- Re: Can I, Chris, 2006/08/14
Crystals' Shunt & Load Capacitance, quanghoc, 2006/08/11
- Re: Crystals' Shunt & Load Capacitance, PeteS, 2006/08/11
  - Re: Crystals' Shunt & Load Capacitance, quanghoc, 2006/08/11
    - Re: Crystals' Shunt & Load Capacitance, PeteS, 2006/08/11
I need help on ADS1217, Steelen, 2006/08/10
- Re: I need help on ADS1217, PeteS, 2006/08/10
- I need help on ADS1217, Steelen, 2006/08/11
Suggestions for aspiring hobbyist, sly . psi, 2006/08/10
- Re: Suggestions for aspiring hobbyist, petrus bitbyter, 2006/08/10
- Re: Suggestions for aspiring hobbyist, Puckdropper, 2006/08/10
- Re: Suggestions for aspiring hobbyist, default, 2006/08/10
- Re: Suggestions for aspiring hobbyist, John Ferrell, 2006/08/10
- Re: Suggestions for aspiring hobbyist, Bob Masta, 2006/08/10
- Re: Suggestions for aspiring hobbyist, Eeyore, 2006/08/10
- Re: Suggestions for aspiring hobbyist, DJ Delorie, 2006/08/10
- Re: Suggestions for aspiring hobbyist, Dave, 2006/08/10
- Re: Suggestions for aspiring hobbyist, Melodolic, 2006/08/11
- Re: Suggestions for aspiring hobbyist, Greg Hansen, 2006/08/11
- Re: Suggestions for aspiring hobbyist, Tavys, 2006/08/11
- Re: Suggestions for aspiring hobbyist, Tavys, 2006/08/11
- Re: Suggestions for aspiring hobbyist, jasen, 2006/08/11
- Re: Suggestions for aspiring hobbyist, Jonathan Kirwan, 2006/08/17
Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, cobsdb, 2006/08/10
- Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Michael A. Terrell, 2006/08/10
  - Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Ken, 2006/08/10
  - Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Mark Oppat, 2006/08/10
    - Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Richard Seriani, Sr., 2006/08/10
      
      Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Theresa McCarty, 2006/08/11
  - Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, cobsdb, 2006/08/11
    - Re: Zenith Model H511 tube radio, please help with identifying value of ceramic capacitor, Michael A. Terrell, 2006/08/11
Electrical pt.2, Tim Williams, 2006/08/10
- Re: Electrical pt.2, Don Young, 2006/08/11
  - Re: Electrical pt.2, Tim Williams, 2006/08/13
    - Re: Electrical pt.2, Don Young, 2006/08/13
What is important to look in OPTOEMITTERS?, quanghoc, 2006/08/09
- Re: What is important to look in OPTOEMITTERS?, Jonathan Kirwan, 2006/08/09
  - Re: What is important to look in OPTOEMITTERS?, quanghoc, 2006/08/09
    - Re: What is important to look in OPTOEMITTERS?, PeteS, 2006/08/10
- Re: What is important to look in OPTOEMITTERS?, default, 2006/08/10
- Re: What is important to look in OPTOEMITTERS?, Rich Grise, 2006/08/10
  - Re: What is important to look in OPTOEMITTERS?, quanghoc, 2006/08/10
    - Re: What is important to look in OPTOEMITTERS?, default, 2006/08/10
      
      Re: What is important to look in OPTOEMITTERS?, quanghoc, 2006/08/10
      
      Re: What is important to look in OPTOEMITTERS?, default, 2006/08/11
- Re: What is important to look in OPTOEMITTERS?, jasen, 2006/08/11
Voltage Regulator help, Matthew Bonacci, 2006/08/09
- Re: Voltage Regulator help, Blake, 2006/08/10
  - Re: Voltage Regulator help, grimmier, 2006/08/10
    - Re: Voltage Regulator help, grimmier, 2006/08/10
      
      Re: Voltage Regulator help, grimmier, 2006/08/10
      
      Re: Voltage Regulator help, kell, 2006/08/11
      
      Re: Voltage Regulator help, Blake, 2006/08/11
- Re: Voltage Regulator help, kell, 2006/08/11
  - Re: Voltage Regulator help, grimmier, 2006/08/12
    - Re: Voltage Regulator help, kell, 2006/08/15
Looking for a good bench PSU, Mark Fortune, 2006/08/09
- Re: Looking for a good bench PSU, Michael A. Terrell, 2006/08/09
- Re: Looking for a good bench PSU, Jonathan Kirwan, 2006/08/09
- Re: Looking for a good bench PSU, Wayne Lundberg, 2006/08/09
- Re: Looking for a good bench PSU, Chris Jones, 2006/08/09
  - Re: Looking for a good bench PSU, KC, 2006/08/10
- Re: Looking for a good bench PSU, Tavys Ashcroft, 2006/08/11
- Re: Looking for a good bench PSU, John Riley, 2006/08/15
- Re: Looking for a good bench PSU, Ernie Werbel, 2006/08/15
DAC selection., lmcgill, 2006/08/09
- Re: DAC selection., Bob Masta, 2006/08/09
- Re: DAC selection., Rich Grise, 2006/08/10
  - Re: DAC selection., lmcgill, 2006/08/10
    - Re: DAC selection., Rich Grise, 2006/08/11
      
      Re: DAC selection., Bob Masta, 2006/08/11
Re: Cluster Intel Bomb, feebo, 2006/08/09
Yet another PIC question, Randy Day, 2006/08/09
- Re: Yet another PIC question, Mark Fortune, 2006/08/09
  - Re: Yet another PIC question, Randy Day, 2006/08/09
- Re: Yet another PIC question, Randy Day, 2006/08/09
  - Re: Yet another PIC question, Mark Fortune, 2006/08/09
  - Re: Yet another PIC question, Mark Fortune, 2006/08/09
- Re: Yet another PIC question, cbarn24050, 2006/08/10
  - Re: Yet another PIC question, Randy Day, 2006/08/11
    - Re: Yet another PIC question, cbarn24050, 2006/08/11
      
      Re: Yet another PIC question, Randy Day, 2006/08/11
      
      Re: Yet another PIC question, cbarn24050, 2006/08/11
      
      Re: Yet another PIC question, Randy Day, 2006/08/12
      
      Re: Yet another PIC question, cbarn24050, 2006/08/12
      
      Re: Yet another PIC question, Randy Day, 2006/08/12
      
      Re: Yet another PIC question, cbarn24050, 2006/08/12
How does a transistor amplify ??, Jiks, 2006/08/09
- Re: How does a transistor amplify ??, John Popelish, 2006/08/09
  - Re: How does a transistor amplify ??, Eeyore, 2006/08/09
  - Re: How does a transistor amplify ??, Bob Myers, 2006/08/09
    - Re: How does a transistor amplify ??, jpopelish, 2006/08/09
  - Why Collector ??, Jiks, 2006/08/10
    - Re: Why Collector ??, John Popelish, 2006/08/10
      
      Re: Why Collector ??, DJ Delorie, 2006/08/10
      
      Re: Why Collector ??, John Popelish, 2006/08/10
      
      Re: Why Collector ??, jasen, 2006/08/10
      
      Re: Why Collector ??, Jiks, 2006/08/11
      
      Re: Why Collector ??, John Popelish, 2006/08/11
    - Re: Why Collector ??, jasen, 2006/08/10
- Re: How does a transistor amplify ??, Jamie, 2006/08/09
  - Re: How does a transistor amplify ??, Bob Myers, 2006/08/09
- Re: How does a transistor amplify ??, Noway2, 2006/08/09
- Re: How does a transistor amplify ??, cabraham01, 2006/08/09
- Re: How does a transistor amplify ??, John Popelish, 2006/08/09
  - Re: How does a transistor amplify ??, Chris, 2006/08/09
  - Re: How does a transistor amplify ??, John Popelish, 2006/08/10
- Re: How does a transistor amplify ??, jasen, 2006/08/10
Just a diode, Jiks, 2006/08/09
- Re: Just a diode, John Popelish, 2006/08/09
  - Re: Just a diode, Steven Swift, 2006/08/09
    - Re: Just a diode, John Popelish, 2006/08/09
      
      Re: Just a diode, Peter M. Groen, 2006/08/11
      
      Re: Just a diode, John Popelish, 2006/08/11
      
      Re: Just a diode, Peter M. Groen, 2006/08/11
      
      Re: Just a diode, Steven Swift, 2006/08/17
      
      Re: Just a diode, John Popelish, 2006/08/17
    - Re: Just a diode, Michael A. Terrell, 2006/08/09
      
      Re: Just a diode, Jiks, 2006/08/10
      
      Re: Just a diode, redbelly, 2006/08/10
      
      Re: Just a diode, John Larkin, 2006/08/12
- Re: Just a diode, kell, 2006/08/11
- Re: Just a diode, jasen, 2006/08/11
Electrolitic Capacitors, JikkuJose, 2006/08/09
- Re: Electrolitic Capacitors, John Popelish, 2006/08/09
- Re: Electrolitic Capacitors, Puckdropper, 2006/08/09
- Re: Electrolitic Capacitors, Rich Grise, 2006/08/10
  - Re: Electrolitic Capacitors, Jiks, 2006/08/10
looking for a 15" lcd with a bad backlight recomend location, rkremser, 2006/08/08
- Re: looking for a 15" lcd with a bad backlight recomend location, Bart Bervoets, 2006/08/09
Super-Accurate Frequency., Gazza, 2006/08/08
- Re: Super-Accurate Frequency., Rich Grise, 2006/08/08
- Re: Super-Accurate Frequency., tapwater, 2006/08/09
  - Re: Super-Accurate Frequency., Gazza, 2006/08/09
    - Re: Super-Accurate Frequency., tapwater, 2006/08/09
      
      Re: Super-Accurate Frequency., Sjouke Burry, 2006/08/09
- Re: Super-Accurate Frequency., Steven Swift, 2006/08/09
Book on AC Design, Greg Hansen, 2006/08/08
- Re: Book on AC Design, Tavys Ashcroft, 2006/08/11
Encoder TTL pulse train multichannel repeater, Haritztolete, 2006/08/08
- Re: Encoder TTL pulse train multichannel repeater, laodao, 2006/08/08
- Re: Encoder TTL pulse train multichannel repeater, Chris, 2006/08/08
Working with SMT components, Abstract Dissonance, 2006/08/08
- Re: Working with SMT components, jasen, 2006/08/08
- Re: Working with SMT components, AJ, 2006/08/08
- Re: Working with SMT components, Noway2, 2006/08/08
- Re: Working with SMT components, jecottrell65, 2006/08/09
- Re: Working with SMT components, Abstract Dissonance, 2006/08/09
  - Re: Working with SMT components, Noway2, 2006/08/09
- Re: Working with SMT components, Abstract Dissonance, 2006/08/11
  - Re: Working with SMT components, DJ Delorie, 2006/08/11
Switching regulator: wide range load current, jidan1, 2006/08/08
12VDC to 18.5VDC, mrdarrett, 2006/08/07
- Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/08
  - Re: 12VDC to 18.5VDC, Rich Grise, 2006/08/08
    - Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/08
      
      Re: 12VDC to 18.5VDC, Joerg, 2006/08/08
  - Re: 12VDC to 18.5VDC, Joerg, 2006/08/08
    - Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/08
      
      Re: 12VDC to 18.5VDC, Joerg, 2006/08/08
  - Re: 12VDC to 18.5VDC, pschoen@xxxxxxxxxx, 2006/08/08
    - Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/08
    - Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/09
      
      Re: 12VDC to 18.5VDC, Tam/WB2TT, 2006/08/09
      
      Re: 12VDC to 18.5VDC, Paul E. Schoen, 2006/08/09
      
      Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/09
      
      Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/09
      
      Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/09
      
      Re: 12VDC to 18.5VDC, Paul E. Schoen, 2006/08/09
  - Re: 12VDC to 18.5VDC, joseph2k, 2006/08/12
    - Re: 12VDC to 18.5VDC, mrdarrett, 2006/08/12
Capacitor value., WAZ, 2006/08/07
- Re: Capacitor value., PeteS, 2006/08/07
  - Re: Capacitor value., Eeyore, 2006/08/07
    - Re: Capacitor value., PeteS, 2006/08/07
- Re: Capacitor value., HKJ, 2006/08/07
- Re: Capacitor value., jasen, 2006/08/08
  - Re: Capacitor value., Eeyore, 2006/08/08
    - Re: Capacitor value., Rich Grise, 2006/08/08
    - Re: Capacitor value., Jamie, 2006/08/09
      
      Re: Capacitor value., PeteS, 2006/08/09
      
      Re: Capacitor value., Jamie, 2006/08/09
E-Mail for Michael Terrell, mea305, 2006/08/07
- Re: E-Mail for Michael Terrell, Michael A. Terrell, 2006/08/08
- Re: E-Mail for Michael Terrell, mea305, 2006/08/08
  - Re: E-Mail for Michael Terrell, Peter Bennett, 2006/08/08
    - Re: E-Mail for Michael Terrell, Rich Grise, 2006/08/08
Re: Ballast question, John Woodgate, 2006/08/07
- Re: Ballast question, Don Klipstein, 2006/08/07
- Re: Ballast question, siliconmike, 2006/08/08
  - Re: Ballast question, Don Klipstein, 2006/08/09
    - Re: Ballast question, splitlink, 2006/08/09
Stepping-up Voltage, epicedium, 2006/08/07
- Re: Stepping-up Voltage, Rich Grise, 2006/08/07
  - Re: Stepping-up Voltage, epicedium, 2006/08/07
    - Re: Stepping-up Voltage, Old Mac User, 2006/08/07
      
      Re: Stepping-up Voltage, epicedium, 2006/08/07
- Re: Stepping-up Voltage, sparc, 2006/08/07
- Re: Stepping-up Voltage, tapwater, 2006/08/07
- Re: Stepping-up Voltage, jasen, 2006/08/08
  - Re: Stepping-up Voltage, epicedium, 2006/08/08
    - Re: Stepping-up Voltage, Old Mac User, 2006/08/08
    - Re: Stepping-up Voltage, Chris, 2006/08/08
    - Re: Stepping-up Voltage, Rich Grise, 2006/08/08
    - Re: Stepping-up Voltage, jasen, 2006/08/09
      
      Re: Stepping-up Voltage, epicedium, 2006/08/10
Quick Capacitance Testing Help, bradgentry, 2006/08/07
- Re: Quick Capacitance Testing Help, Ralph Mowery, 2006/08/07
  - Re: Quick Capacitance Testing Help, bradgentry, 2006/08/07
    - Re: Quick Capacitance Testing Help, Michael Black, 2006/08/07
- Re: Quick Capacitance Testing Help, Michael A. Terrell, 2006/08/08
Visit the Groups Website for Software, tech support, formulas, links,, Scott Smith, 2006/08/07
Op-amp transfer function help, Wayne, 2006/08/07
- Re: Op-amp transfer function help, John Popelish, 2006/08/07
  - Re: Op-amp transfer function help, Wayne, 2006/08/07
    - Re: Op-amp transfer function help, John Popelish, 2006/08/07
Power supply, Periproct, 2006/08/06
- Re: Power supply, petrus bitbyter, 2006/08/07
- Re: Power supply, CheapscateDave, 2006/08/07
- Re: Power supply, Rich Grise, 2006/08/07
  - Re: Power supply, Periproct, 2006/08/12
Re: frequency/clock stability, Dr . Anton T . Squeegee, 2006/08/06
- Re: frequency/clock stability, Tom Biasi, 2006/08/06
74LS193 Cascading Question, Bart, 2006/08/06
- Re: 74LS193 Cascading Question, Michael Black, 2006/08/06
  - Re: 74LS193 Cascading Question, Bart, 2006/08/06
    - Re: 74LS193 Cascading Question, Jamie, 2006/08/07
- Re: 74LS193 Cascading Question, Chris, 2006/08/06
  - Re: 74LS193 Cascading Question, Chris, 2006/08/07
    - Re: 74LS193 Cascading Question, Chris, 2006/08/07
- Re: 74LS193 Cascading Question, petrus bitbyter, 2006/08/07
- Re: 74LS193 Cascading Question, Bart, 2006/08/08
  - Re: 74LS193 Cascading Question, Chris, 2006/08/08
    - Re: 74LS193 Cascading Question, Bart, 2006/08/08
    - Re: 74LS193 Cascading Question, Rich Grise, 2006/08/08
harnessing a stereo receiver speaker wire signal to produce light, sasha . cuerda, 2006/08/06
- Re: harnessing a stereo receiver speaker wire signal to produce light, Chris, 2006/08/06
- Re: harnessing a stereo receiver speaker wire signal to produce light, jasen, 2006/08/07
Quartz Crystal stability?, Bill Bowden, 2006/08/06
- Re: Quartz Crystal stability?, Tom Biasi, 2006/08/06
  - Re: Quartz Crystal stability?, Bill Bowden, 2006/08/08
    - Re: Quartz Crystal stability?, Tom Biasi, 2006/08/09
- Re: Quartz Crystal stability?, Eeyore, 2006/08/07
- Re: Quartz Crystal stability?, sparc, 2006/08/08
PIC program question, Randy Day, 2006/08/05
- Re: PIC program question, Pete, 2006/08/06
- Re: PIC program question, Byron A Jeff, 2006/08/06
  - Re: PIC program question, Randy Day, 2006/08/06
    - Re: PIC program question, Byron A Jeff, 2006/08/06
      
      Re: PIC program question, Charles Jean, 2006/08/06
      
      Re: PIC program question, Randy Day, 2006/08/06
      
      YES!! was: Re: PIC program question, Randy Day, 2006/08/07
- Re: PIC program question, feebo, 2006/08/06
  - Re: PIC program question, Randy Day, 2006/08/06
    - Re: PIC program question, Byron A Jeff, 2006/08/06
Home brew lab hotplate, Melodolic, 2006/08/05
- Home brew lab hotplate, Arnold, 2006/08/05
  - Re: Home brew lab hotplate, Melodolic, 2006/08/05
    - Re: Home brew lab hotplate, Ken Moffett, 2006/08/05
      
      Re: Home brew lab hotplate, Melodolic, 2006/08/05
      
      Re: Home brew lab hotplate, Ken Moffett, 2006/08/05
      
      Re: Home brew lab hotplate, Melodolic, 2006/08/13
    - Re: Home brew lab hotplate, Michael Black, 2006/08/05
      
      Re: Home brew lab hotplate, Melodolic, 2006/08/13
      
      Re: Home brew lab hotplate, jasen, 2006/08/14
- Re: Home brew lab hotplate, Chris, 2006/08/05
  - Re: Home brew lab hotplate, Melodolic, 2006/08/13
    - Re: Home brew lab hotplate, Rich Grise, 2006/08/15
      
      Re: Home brew lab hotplate, Melodolic, 2006/08/16
- Re: Home brew lab hotplate, default, 2006/08/05
  - Re: Home brew lab hotplate, Melodolic, 2006/08/05
    - Re: Home brew lab hotplate, default, 2006/08/05
      
      Re: Home brew lab hotplate, Melodolic, 2006/08/13
- Re: Home brew lab hotplate, cornytheclown, 2006/08/06
- Re: Home brew lab hotplate, Rich Grise, 2006/08/06
  - Re: Home brew lab hotplate, Don Bruder, 2006/08/06
Electrolytic Data Sheet Question, jecottrell65, 2006/08/05
- Re: Electrolytic Data Sheet Question, John Fields, 2006/08/05
Re: Need help amplifying Pulse Train to drive Pen Laser tia sal2, Daniel, 2006/08/05
Re: SolderSmoke #28: SPRAT, QRSS, QST $50 RIG, Class C saturation? A Logo for SolderSmoke, bull65, 2006/08/05
transistor, chrajesh911@xxxxxxxxx, 2006/08/05
- Re: transistor, Eeyore, 2006/08/05
- Re: transistor, default, 2006/08/05
- Re: transistor, Rich Grise, 2006/08/06
transistor working, chrajesh911@xxxxxxxxx, 2006/08/05
- Re: transistor working, Bob, 2006/08/05
- Re: transistor working, Eeyore, 2006/08/05
- Re: transistor working, John Larkin, 2006/08/05
Re: Newbie electronic resistance question, Alan B, 2006/08/05
Re: Question about DRAM IC's, techie_alison, 2006/08/05
- Re: Question about DRAM IC's, techie_alison, 2006/08/05
  - Re: Question about DRAM IC's, Henry, 2006/08/10
Datasheet Confusion, Bart, 2006/08/05
- Re: Datasheet Confusion, John Fields, 2006/08/05
- Re: Datasheet Confusion, Lord Garth, 2006/08/05
  - Re: Datasheet Confusion, Rich Grise, 2006/08/05
    - Re: Datasheet Confusion, Lord Garth, 2006/08/05
- Re: Datasheet Confusion, Alan B, 2006/08/05
- Re: Datasheet Confusion, petrus bitbyter, 2006/08/05
- Re: Datasheet Confusion, Bart, 2006/08/05
Re: Interpretation of Transistor Datasheets, jecottrell65, 2006/08/04
Need assistance, Chewbacca, 2006/08/04
- abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Eeyore, 2006/08/04
  - Re: abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Puckdropper, 2006/08/05
    - Re: abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Eeyore, 2006/08/05
      
      Re: abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Net Cop, 2006/08/06
      
      Re: abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Michael A. Terrell, 2006/08/07
      
      Re: abuse@xxxxxxxxxxxxxxxxx was - Re: Need assistance, Eeyore, 2006/08/07
Please assist, Chewbacca, 2006/08/04
- abuse@xxxxxxxxxxxxxxxxx was - Re: Please assist, Eeyore, 2006/08/04
- Please assist, Chewbacca, 2006/08/04
Need help from serious Guru, Chewbacca, 2006/08/04
- Re: Need help from serious Guru **** SPAM****, Tom Biasi, 2006/08/04
- abuse@xxxxxxxxxxxxxxxxx was - Re: Need help from serious Guru, Eeyore, 2006/08/04
Piezo Gyroscopes?, ...Ad!, 2006/08/04
- Re: Piezo Gyroscopes?, steamer, 2006/08/04
Ceramic capacitor polarity trick, Jason Carson, 2006/08/04
- Re: Ceramic capacitor polarity trick, Ancient_Hacker, 2006/08/04
- Re: Ceramic capacitor polarity trick, Genome, 2006/08/04
  - Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/04
    - Re: Ceramic capacitor polarity trick, Genome, 2006/08/04
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/04
      
      Re: Ceramic capacitor polarity trick, Genome, 2006/08/04
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/04
      
      Re: Ceramic capacitor polarity trick, Tim Williams, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Rich Grise, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, Alan B, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Michael A. Terrell, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Alan B, 2006/08/05
  - Re: Ceramic capacitor polarity trick, Jason Carson, 2006/08/07
    - Re: Ceramic capacitor polarity trick, Genome, 2006/08/07
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/07
      
      Re: Ceramic capacitor polarity trick, Lostgallifreyan, 2006/08/07
      
      Re: Ceramic capacitor polarity trick, Michael A. Terrell, 2006/08/08
      
      Re: Ceramic capacitor polarity trick, Rich Grise, 2006/08/08
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/08
      
      Re: Ceramic capacitor polarity trick, Lostgallifreyan, 2006/08/08
      
      Re: Ceramic capacitor polarity trick, Bobo The Chimp, 2006/08/10
      
      Re: Ceramic capacitor polarity trick, Don Lancaster, 2006/08/10
      
      Re: Ceramic capacitor polarity trick, Rich Grise, 2006/08/09
- Re: Ceramic capacitor polarity trick, jasen, 2006/08/05
  - Re: Ceramic capacitor polarity trick, Joel Kolstad, 2006/08/05
    - Re: Ceramic capacitor polarity trick, Walter Harley, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Eeyore, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, joseph2k, 2006/08/11
      
      Re: Ceramic capacitor polarity trick, John Larkin, 2006/08/11
      
      Re: Ceramic capacitor polarity trick, Joel Kolstad, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Larkin, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Larkin, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, Mike Monett, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, John Larkin, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/06
      
      Re: Ceramic capacitor polarity trick, jasen, 2006/08/07
      
      Re: Ceramic capacitor polarity trick, jasen, 2006/08/07
      
      Message not available
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/06
    - Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Spehro Pefhany, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Devereux, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Spehro Pefhany, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Lostgallifreyan, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Woodgate, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, Fred Bloggs, 2006/08/05
      
      Re: Ceramic capacitor polarity trick, John Devereux, 2006/08/05
    - Re: Ceramic capacitor polarity trick, jasen, 2006/08/05
- Re: Ceramic capacitor polarity trick, joseph2k, 2006/08/11
Help identifying a component.., mike, 2006/08/04
- Re: Help identifying a component.., Michael Black, 2006/08/04
- Re: Help identifying a component.., Michael A. Terrell, 2006/08/04
- Re: Help identifying a component.., Lord Garth, 2006/08/04
  - Re: Help identifying a component.., Eeyore, 2006/08/04
    - Re: Help identifying a component.., mike, 2006/08/05
      
      Re: Help identifying a component.., Eeyore, 2006/08/05
      
      Re: Help identifying a component.., jasen, 2006/08/05
- Re: Help identifying a component.., ...Ad!, 2006/08/04
- Re: Help identifying a component.., Rich Grise, 2006/08/04
- Re: Help identifying a component.., Eeyore, 2006/08/04
- Re: Help identifying a component.., Gerald Cohn, 2006/08/13
Detecting a magnet passing through a coil using a darlington pair?, Kieran Simkin, 2006/08/04
- Re: Detecting a magnet passing through a coil using a darlington pair?, cbarn24050, 2006/08/04
  - Re: Detecting a magnet passing through a coil using a darlington pair?, ...Ad!, 2006/08/04
- Re: Detecting a magnet passing through a coil using a darlington pair?, Mike, 2006/08/05
Serious proposal to this group, tapwater, 2006/08/04
- Re: Serious proposal to this group, Hlrsr, 2006/08/04
- Re: Serious proposal to this group, Tom Biasi, 2006/08/04
  - Re: Serious proposal to this group, tapwater, 2006/08/04
    - Re: Serious proposal to this group, Tom Biasi, 2006/08/04
      
      Re: Serious proposal to this group, PeteS, 2006/08/04
      
      Re: Serious proposal to this group, ...Ad!, 2006/08/04
  - Re: Serious proposal to this group, R. Steve Walz, 2006/08/07
    - Re: Serious proposal to this group, Apostrophe Police, 2006/08/07
- Re: Serious proposal to this group, redbelly, 2006/08/04
- Re: Serious proposal to this group, Rich Grise, 2006/08/04
  - Re: Serious proposal to this group, John Larkin, 2006/08/04
  - Re: Serious proposal to this group, tapwater, 2006/08/04
    - Re: Serious proposal to this group, Tom Biasi, 2006/08/04
    - Re: Serious proposal to this group, Rich Grise, 2006/08/05
- Re: Serious proposal to this group, Eeyore, 2006/08/04
- Re: Serious proposal to this group, Alan B, 2006/08/05
- Re: Serious proposal to this group, jasen, 2006/08/05
  - Re: Serious proposal to this group, John Larkin, 2006/08/05
    - Re: Serious proposal to this group, tapwater, 2006/08/05
      
      Re: Serious proposal to this group, Alan B, 2006/08/07
    - Re: Serious proposal to this group, Alan B, 2006/08/07
- Re: Serious proposal to this group, David L. Jones, 2006/08/07
  - Re: Serious proposal to this group, tapwater, 2006/08/07
    - Re: Serious proposal to this group, Alan B, 2006/08/07
Is there a ZigBee to ethernet gateway?, realexander, 2006/08/03
Where do you get those voltages?, Greg Hansen, 2006/08/03
- Re: Where do you get those voltages?, DJ Delorie, 2006/08/03
  - Re: Where do you get those voltages?, Greg Hansen, 2006/08/05
    - Re: Where do you get those voltages?, Alan B, 2006/08/05
- Re: Where do you get those voltages?, Lord Garth, 2006/08/03
- Re: Where do you get those voltages?, Chris, 2006/08/03
  - Re: Where do you get those voltages?, Greg Hansen, 2006/08/05
    - Re: Where do you get those voltages?, Chris, 2006/08/05
      
      Re: Where do you get those voltages?, Greg Hansen, 2006/08/06
      
      Re: Where do you get those voltages?, Chris, 2006/08/06
- Re: Where do you get those voltages?, Rich Grise, 2006/08/04
- Re: Where do you get those voltages?, Peter Bennett, 2006/08/06
  - Re: Where do you get those voltages?, glhansen, 2006/08/07
LED' s resistor formula, Lee, 2006/08/03
- Re: LED' s resistor formula, Tom Biasi, 2006/08/03
- Re: LED' s resistor formula, Noway2, 2006/08/03
- Re: LED' s resistor formula, HKJ, 2006/08/03
- Re: LED' s resistor formula, DJ Delorie, 2006/08/03
  - Re: LED' s resistor formula, Peter Bennett, 2006/08/03
    - Re: LED' s resistor formula, DJ Delorie, 2006/08/03
- Re: LED' s resistor formula, John Fields, 2006/08/03
- Re: LED' s resistor formula, Bill Bowden, 2006/08/03
Relation, apstvl, 2006/08/03
- Re: Relation, redbelly, 2006/08/03
  - Re: Relation, vic, 2006/08/04
    - Re: Relation, Greg Neill, 2006/08/04
    - Re: Relation, redbelly, 2006/08/04
- Re: Relation, John O'Flaherty, 2006/08/03
- Re: Relation, jasen, 2006/08/04
  - Re: Relation, tapwater, 2006/08/04
    - Tapwater distinguishes himself again ! was : Re: Relation, Eeyore, 2006/08/04
      
      Re: Tapwater distinguishes himself again ! was : Re: Relation, Fred Bartoli, 2006/08/04
      
      Re: Tapwater distinguishes himself again ! was : Re: Relation, thepackrat741@xxxxxxxxx, 2006/08/04
      
      Re: Tapwater distinguishes himself again ! was : Re: Relation, tapwater, 2006/08/04
      
      Re: Tapwater distinguishes himself again ! was : Re: Relation, Alan B, 2006/08/05
    - Re: Relation, tapwater, 2006/08/04
      
      Re: Relation, Alan B, 2006/08/04
      
      Re: Relation, tapwater, 2006/08/04
      
      Re: Relation, Alan B, 2006/08/05
      
      Re: Relation, Bob Myers, 2006/08/04
      
      Re: Relation, tapwater, 2006/08/04
      
      Re: Relation, Bob Myers, 2006/08/04
    - Re: Relation, tapwater, 2006/08/04
      
      Re: Relation, Alan B, 2006/08/04
      
      Re: Relation, jasen, 2006/08/05
    - Re: Relation, Bob Masta, 2006/08/04
    - Re: Relation, jasen, 2006/08/05
      
      Re: Relation, Alan B, 2006/08/05
    - Re: Relation, R. Steve Walz, 2006/08/07
"Recycle" Laptop Monitor, Mark Jerde, 2006/08/03
- Re: "Recycle" Laptop Monitor, Michael A. Terrell, 2006/08/03
  - Re: "Recycle" Laptop Monitor, Mark Jerde, 2006/08/03
    - Re: "Recycle" Laptop Monitor, Michael Black, 2006/08/03
    - Re: "Recycle" Laptop Monitor, Michael A. Terrell, 2006/08/03
Stepper Motors, Counts, Steps, Pauses, Cycles, W. Watson, 2006/08/03
- Re: Stepper Motors, Counts, Steps, Pauses, Cycles, John O'Flaherty, 2006/08/03
  - Re: Stepper Motors, Counts, Steps, Pauses, Cycles, W. Watson, 2006/08/03
    - Re: Stepper Motors, Counts, Steps, Pauses, Cycles, John O'Flaherty, 2006/08/03
      
      Re: Stepper Motors, Counts, Steps, Pauses, Cycles, W. Watson, 2006/08/04
- Re: Stepper Motors, Counts, Steps, Pauses, Cycles, Chris, 2006/08/03
  - Re: Stepper Motors, Counts, Steps, Pauses, Cycles, W. Watson, 2006/08/04
    - Re: Stepper Motors, Counts, Steps, Pauses, Cycles, Chris, 2006/08/04
      
      Re: Stepper Motors, Counts, Steps, Pauses, Cycles, W. Watson, 2006/08/09
Info about KEC 168, Jamshaid Soldier, 2006/08/03
- Re: Info about KEC 168, Lord Garth, 2006/08/03
using 12 volt battery with a 7.2 volt drill, Mike, 2006/08/03
- Re: using 12 volt battery with a 7.2 volt drill, Eeyore, 2006/08/03
- Re: using 12 volt battery with a 7.2 volt drill, jasen, 2006/08/03
- Re: using 12 volt battery with a 7.2 volt drill, Tom Biasi, 2006/08/03
- Re: using 12 volt battery with a 7.2 volt drill, Chris, 2006/08/03
- Re: using 12 volt battery with a 7.2 volt drill, Roger Dewhurst, 2006/08/03
  - Re: using 12 volt battery with a 7.2 volt drill, Mark Clements, 2006/08/04
    - Re: using 12 volt battery with a 7.2 volt drill, jasen, 2006/08/05
      
      Re: using 12 volt battery with a 7.2 volt drill, Mark Clements, 2006/08/06
    - Re: using 12 volt battery with a 7.2 volt drill, Alan B, 2006/08/05
- Re: using 12 volt battery with a 7.2 volt drill, Rich Grise, 2006/08/04
Noob Question on Wall Warts..., stevelibert@xxxxxxxxx, 2006/08/03
- Re: Noob Question on Wall Warts..., Michael Black, 2006/08/03
- Re: Noob Question on Wall Warts..., jasen, 2006/08/03
- Re: Noob Question on Wall Warts..., Bob Masta, 2006/08/03
  - Re: Noob Question on Wall Warts..., stevelibert@xxxxxxxxx, 2006/08/04
    - Re: Noob Question on Wall Warts..., Bob Masta, 2006/08/04
Transistor Saturation, Bart, 2006/08/03
- Re: Transistor Saturation, Winfield, 2006/08/03
  - Re: Transistor Saturation, Winfield, 2006/08/03
- Re: Transistor Saturation, Eeyore, 2006/08/03
- Re: Transistor Saturation, Noway2, 2006/08/03
- Re: Transistor Saturation, Dorian McIntire, 2006/08/03
- Re: Transistor Saturation, John Fields, 2006/08/03
- Re: Transistor Saturation, Jonathan Kirwan, 2006/08/03
- Re: Transistor Saturation, Bart, 2006/08/05
  - Re: Transistor Saturation, Noway2, 2006/08/07
Re: What is 18 pins I/O plug?, Yeonsuk, 2006/08/03
- Re: What is 18 pins I/O plug?, jasen, 2006/08/03
Transmitter, Ken O, 2006/08/03
- Re: Transmitter, Tom Biasi, 2006/08/03
- Re: Transmitter, Andrew Holme, 2006/08/03
  - Re: Transmitter, Ken O, 2006/08/04
    - Re: Transmitter, Rich Grise, 2006/08/04
    - Re: Transmitter, Andrew Holme, 2006/08/05
      
      Re: Transmitter, Andrew Holme, 2006/08/05
- Transmitter, lerameur, 2006/08/21
- Transmitter, lerameur, 2006/08/21
Logarithmic response of PN junctions, Rich Grise, Plainclothes Hippie, 2006/08/03
- Re: Logarithmic response of PN junctions, Bob Eld, 2006/08/03
- Re: Logarithmic response of PN junctions, Jonathan Kirwan, 2006/08/03
  - Re: Logarithmic response of PN junctions, Rich Grise, 2006/08/03
  - Re: Logarithmic response of PN junctions, Bill Bowden, 2006/08/04
- Re: Logarithmic response of PN junctions, jasen, 2006/08/03
- Re: Logarithmic response of PN junctions, Narf, 2006/08/04
Powering Thermostat with 24VDC instead of 24VAC, FryingDutchman, 2006/08/02
- Re: Powering Thermostat with 24VDC instead of 24VAC, Lord Garth, 2006/08/02
- Re: Powering Thermostat with 24VDC instead of 24VAC, Eeyore, 2006/08/02
5 and 10 MHz clock inputs, mike7411, 2006/08/02
- Re: 5 and 10 MHz clock inputs, PeteS, 2006/08/02
- Re: 5 and 10 MHz clock inputs, David L. Jones, 2006/08/03
- Re: 5 and 10 MHz clock inputs, Michael A. Terrell, 2006/08/03
How to replace points with Solid State 277cc Rotax?, Gerryo, 2006/08/02
- Re: How to replace points with Solid State 277cc Rotax?, Rich Grise, 2006/08/03
- Re: How to replace points with Solid State 277cc Rotax?, Eric R Snow, 2006/08/03
- Re: How to replace points with Solid State 277cc Rotax?, kell, 2006/08/03
  - Re: How to replace points with Solid State 277cc Rotax?, kell, 2006/08/03
    - Re: How to replace points with Solid State 277cc Rotax?, Gerryo, 2006/08/04
      
      Re: How to replace points with Solid State 277cc Rotax?, Rich Grise, 2006/08/04
      
      Re: How to replace points with Solid State 277cc Rotax?, kell, 2006/08/04
Re: question about networking hubs / ethernet repeaters, q_q_anonymous, 2006/08/02
Elementary Transistor Problem, ragtag99, 2006/08/02
- Re: Elementary Transistor Problem, Rheilly Phoull, 2006/08/02
  - Re: Elementary Transistor Problem, Dorian McIntire, 2006/08/03
- Re: Elementary Transistor Problem, default, 2006/08/02
- Re: Elementary Transistor Problem, jasen, 2006/08/02
- Re: Elementary Transistor Problem, Rich Grise, 2006/08/03
  - Re: Elementary Transistor Problem, jasen, 2006/08/03
Information on IC PA2003C, Handyman, 2006/08/01
- Re: Information on IC PA2003C, Bart, 2006/08/01
  - Re: Information on IC PA2003C, Handyman, 2006/08/03
Re: pls explain this circuit in detail, rue_mohr, 2006/08/01
9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., Tom Biasi, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., zekor, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
    - Re: 9V battery testing; Thevenin equivalent; car headlamps., Tom Biasi, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., Joop van der Velden, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Phil Allison, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
    - Re: 9V battery testing; Thevenin equivalent; car headlamps., jasen, 2006/08/02
      
      Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/02
- Re: 9V battery testing; Thevenin equivalent; car headlamps., Greg Neill, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., John Larkin, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., Stanislaw Flatto, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., lsmartino, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., redbelly, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., mc, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., redbelly, 2006/08/01
  - Re: 9V battery testing; Thevenin equivalent; car headlamps., Adam Funk, 2006/08/01
    - Re: 9V battery testing; Thevenin equivalent; car headlamps., Sofie, 2006/08/01
    - Re: 9V battery testing; Thevenin equivalent; car headlamps., mc, 2006/08/01
- Re: 9V battery testing; Thevenin equivalent; car headlamps., Old Mac User, 2006/08/01
Self-Clocking Data?, FyberOptic, 2006/08/01
- Re: Self-Clocking Data?, Eeyore, 2006/08/01
- Re: Self-Clocking Data?, Jenalee K., 2006/08/01
  - Re: Self-Clocking Data?, Eeyore, 2006/08/01
    - Re: Self-Clocking Data?, PeteS, 2006/08/01
- Re: Self-Clocking Data?, Bob Eld, 2006/08/02
  - Re: Self-Clocking Data?, PeteS, 2006/08/02
- Re: Self-Clocking Data?, jasen, 2006/08/02
- Re: Self-Clocking Data?, vic, 2006/08/02
Re: inert gas, John Larkin, 2006/08/01
- Re: inert gas, redbelly, 2006/08/01
  - Re: inert gas, John Fields, 2006/08/01
  - Re: inert gas, tapwater, 2006/08/01
    - Re: inert gas, tapwater, 2006/08/01
- Re: inert gas, R. Steve Walz, 2006/08/07
  - Re: inert gas, Michael A. Terrell, 2006/08/07
  - Re: inert gas, tapwater, 2006/08/08
    - Re: inert gas, Phil Allison, 2006/08/08
    - Re: inert gas, Eeyore, 2006/08/08
      
      Re: inert gas, tapwater, 2006/08/08
    - Re: inert gas, Don Klipstein, 2006/08/09
    - Re: inert gas, jasen, 2006/08/09
      
      Re: inert gas, tapwater, 2006/08/09
Re: potentiometer, Dorian McIntire, 2006/08/01
Re: 240V AC, John G, 2006/07/31
- Re: 240V AC, Puckdropper, 2006/08/01
Re: Infra red, Roger Dewhurst, 2006/07/31
- Re: Infra red, John Fields, 2006/07/31
- Re: Infra red, Chris, 2006/07/31
Re: Recomendations about wire strippers and methods, Rich Grise, 2006/07/31
- Re: Recomendations about wire strippers and methods, FyberOptic, 2006/08/01
- Re: Recomendations about wire strippers and methods, redbelly, 2006/08/01
Re: 3 phase inverter design, Ayisha, 2006/07/31
- Re: 3 phase inverter design, sparc, 2006/07/31
- Re: 3 phase inverter design, GPG, 2006/08/01
  - Re: 3 phase inverter design, Dave, 2006/08/01
Re: 12V 80Va Transformer, John Fields, 2006/07/31
Re: detecting contact closure, Rich Grise, 2006/07/31
- Re: detecting contact closure, John Fields, 2006/07/31
  - Re: detecting contact closure, Abstract Dissonance, 2006/08/02
    - Re: detecting contact closure, John Fields, 2006/08/02
- Re: detecting contact closure, petrus bitbyter, 2006/08/02
- Re: detecting contact closure, Jamie, 2006/08/02
  - Re: detecting contact closure, leeps, 2006/08/02
  - Re: detecting contact closure, leeps, 2006/08/02
Re: Why polairity on a DC relay?, Ryan Weihl, 2006/07/28