[email protected]
[Top] [All Lists]

I-D ACTION:draft-ietf-rtgwg-ipfrr-framework-06.txt

Subject: I-D ACTION:draft-ietf-rtgwg-ipfrr-framework-06.txt
From:
Date: Fri, 20 Oct 2006 18:50:02 -0400
A New Internet-Draft is available from the on-line Internet-Drafts 
directories.
This draft is a work item of the Routing Area Working Group Working Group of 
the IETF.

        Title           : IP Fast Reroute Framework
        Author(s)       : M. Shand, S. Bryant
        Filename        : draft-ietf-rtgwg-ipfrr-framework-06.txt
        Pages           : 14
        Date            : 2006-10-20
        
This document provides a framework for the development of IP
   fast-reroute mechanisms which provide protection against link or
   router failure by invoking locally determined repair paths. Unlike
   MPLS Fast-reroute, the mechanisms are applicable to a network
   employing conventional IP routing and forwarding. An essential part
   of such mechanisms is the prevention of packet loss caused by the
   loops which normally occur during the re-convergence of the network
   following a failure.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-rtgwg-ipfrr-framework-06.txt

To remove yourself from the I-D Announcement list, send a message to 
[email protected] with the word unsubscribe in the body of 
the message. 
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the 
username "anonymous" and a password of your e-mail address. After 
logging in, type "cd internet-drafts" and then 
"get draft-ietf-rtgwg-ipfrr-framework-06.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
        [email protected]
In the body type:
        "FILE /internet-drafts/draft-ietf-rtgwg-ipfrr-framework-06.txt".
        
NOTE:   The mail server at ietf.org can return the document in
        MIME-encoded form by using the "mpack" utility.  To use this
        feature, insert the command "ENCODING mime" before the "FILE"
        command.  To decode the response(s), you will need "munpack" or
        a MIME-compliant mail reader.  Different MIME-compliant mail readers
        exhibit different behavior, especially when dealing with
        "multipart" MIME messages (i.e. documents which have been split
        up into multiple messages), so check your local documentation on
        how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-ietf-rtgwg-ipfrr-framework-06.txt>
_______________________________________________
rtgwg mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/rtgwg
<Prev in Thread] Current Thread [Next in Thread>
  • I-D ACTION:draft-ietf-rtgwg-ipfrr-framework-06.txt, Internet-Drafts <=