|
|
http://perforce.freebsd.org/chv.cgi?CH=110741
Change 110741 by mjacob@newisp on 2006/11/30 19:27:09
Consolidate some async events and be quiet about them.
Suppress TMF issuance/completion chattiness but be chatty
about being asked to reset a bus.
Check spi/scsi valid fields- if they're zero on
XPT_SET_TRAN_SETTINGS just set CAM_REQ_CMP and return.
Try to do more negotiation cleanup.
If a TMF handshake command fails, pull it off the request
pending list and set the state to FREE to avoid a panic
later.
Affected files ...
.. //depot/projects/newisp/dev/mpt/mpt_cam.c#13 edit
Differences ...
==== //depot/projects/newisp/dev/mpt/mpt_cam.c#13 (text+ko) ====
@@ -2151,10 +2151,6 @@
mpt_prt(mpt, "FC Logout Port: %d N_PortID: %02x\n",
(data1 >> 8) & 0xff, data0);
break;
- case MPI_EVENT_EVENT_CHANGE:
- mpt_lprt(mpt, MPT_PRT_DEBUG,
- "mpt_cam_event: MPI_EVENT_EVENT_CHANGE\n");
- break;
case MPI_EVENT_QUEUE_FULL:
{
struct cam_sim *sim;
@@ -2193,18 +2189,11 @@
CAMLOCK_2_MPTLOCK(mpt);
break;
}
+ case MPI_EVENT_EVENT_CHANGE:
+ case MPI_EVENT_INTEGRATED_RAID:
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
- {
- mpt_lprt(mpt, MPT_PRT_DEBUG,
- "mpt_cam_event: SAS_DEVICE_STATUS_CHANGE\n");
- break;
- }
case MPI_EVENT_SAS_SES:
- {
- mpt_lprt(mpt, MPT_PRT_DEBUG,
- "mpt_cam_event: MPI_EVENT_SAS_SES\n");
break;
- }
default:
mpt_lprt(mpt, MPT_PRT_WARN, "mpt_cam_event: 0x%x\n",
msg->Event & 0xFF);
@@ -2327,7 +2316,7 @@
req->IOCStatus = le16toh(tmf_reply->IOCStatus);
req->ResponseCode = tmf_reply->ResponseCode;
- mpt_lprt(mpt, MPT_PRT_INFO, "TMF complete: req %p:%u status 0x%x\n",
+ mpt_lprt(mpt, MPT_PRT_DEBUG, "TMF complete: req %p:%u status 0x%x\n",
req, req->serno, le16toh(tmf_reply->IOCStatus));
TAILQ_REMOVE(&mpt->request_pending_list, req, links);
if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) {
@@ -2913,10 +2902,16 @@
return;
case XPT_RESET_BUS:
+ if (raid_passthru) {
+ ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
+ mpt_set_ccb_status(ccb, CAM_REQ_CMP);
+ break;
+ }
case XPT_RESET_DEV:
- mpt_lprt(mpt, MPT_PRT_DEBUG,
- ccb->ccb_h.func_code == XPT_RESET_BUS ?
- "XPT_RESET_BUS\n" : "XPT_RESET_DEV\n");
+
+ xpt_print_path(ccb->ccb_h.path);
+ printf("reset %s\n", ccb->ccb_h.func_code == XPT_RESET_BUS?
+ "bus" : "device");
CAMLOCK_2_MPTLOCK(mpt);
(void) mpt_bus_reset(mpt, tgt, lun, FALSE);
@@ -2986,14 +2981,25 @@
break;
}
+ scsi = &cts->proto_specific.scsi;
+ spi = &cts->xport_specific.spi;
+
/*
+ * We can be called just to valid transport and proto versions
+ */
+ if (scsi->valid == 0 && spi->valid == 0) {
+ mpt_set_ccb_status(ccb, CAM_REQ_CMP);
+ break;
+ }
+
+ /*
* Skip attempting settings on RAID volume disks.
* Other devices on the bus get the normal treatment.
*/
if (mpt->phydisk_sim && raid_passthru == 0 &&
mpt_is_raid_volume(mpt, tgt) != 0) {
mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
- "skipping transfer settings for RAID volumes\n");
+ "no transfer settings for RAID vols\n");
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
break;
}
@@ -3014,9 +3020,6 @@
period = 0;
offset = 0;
- scsi = &cts->proto_specific.scsi;
- spi = &cts->xport_specific.spi;
-
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
dval |= ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) ?
DP_DISC_ENABLE : DP_DISC_DISABL;
@@ -3074,10 +3077,9 @@
mpt_set_ccb_status(ccb, CAM_REQ_CMP);
break;
}
-
mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
- "Set Settings[%d]: 0x%x period 0x%x offset %d\n", tgt,
- dval, period , offset);
+ "set [%d]: 0x%x period 0x%x offset %d\n",
+ tgt, dval, period, offset);
if (mpt_update_spi_config(mpt, tgt)) {
mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
} else {
@@ -3088,29 +3090,24 @@
}
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
+ cts->protocol = PROTO_SCSI;
if (mpt->is_fc) {
struct ccb_trans_settings_fc *fc =
&cts->xport_specific.fc;
-
- cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_SPC;
cts->transport = XPORT_FC;
cts->transport_version = 0;
-
fc->valid = CTS_FC_VALID_SPEED;
- fc->bitrate = 100000; /* XXX: Need for 2Gb/s */
- /* XXX: need a port database for each target */
+ fc->bitrate = 100000;
} else if (mpt->is_sas) {
struct ccb_trans_settings_sas *sas =
&cts->xport_specific.sas;
- cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_SPC2;
cts->transport = XPORT_SAS;
cts->transport_version = 0;
-
sas->valid = CTS_SAS_VALID_SPEED;
- sas->bitrate = 300000; /* XXX: Default 3Gbps */
+ sas->bitrate = 300000;
} else if (mpt_get_spi_settings(mpt, cts) != 0) {
mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR);
break;
@@ -3141,63 +3138,61 @@
cpi->hba_eng_cnt = 0;
cpi->max_target = mpt->mpt_max_devices - 1;
/*
- * XXX: FC cards report MAX_DEVICES of 512- but we
- * XXX: seem to hang when going higher than 255.
+ * FC cards report MAX_DEVICES of 512, but
+ * the MSG_SCSI_IO_REQUEST target id field
+ * is only 8 bits. Until we fix the driver
+ * to support 'channels' for bus overflow,
+ * just limit it.
*/
if (cpi->max_target > 255) {
cpi->max_target = 255;
}
+
/*
- * XXX: VMware ESX reports > 16 devices and then dies
- * XXX: when we probe.
+ * VMware ESX reports > 16 devices and then dies when we probe.
*/
if (mpt->is_spi && cpi->max_target > 15) {
cpi->max_target = 15;
}
cpi->max_lun = 7;
cpi->initiator_id = mpt->mpt_ini_id;
+ cpi->bus_id = cam_sim_bus(sim);
- cpi->bus_id = cam_sim_bus(sim);
/*
- * Actual speed for each device varies.
- *
* The base speed is the speed of the underlying connection.
- * This is strictly determined for SPI (async, narrow). If
- * link is up for Fibre Channel, then speed can be gotten
- * from that.
*/
+ cpi->protocol = PROTO_SCSI;
if (mpt->is_fc) {
cpi->hba_misc = PIM_NOBUSRESET;
cpi->base_transfer_speed = 100000;
cpi->hba_inquiry = PI_TAG_ABLE;
- cpi->transport = XPORT_FC;
- cpi->transport_version = 0;
+ cpi->transport = XPORT_FC;
+ cpi->transport_version = 0;
+ cpi->protocol_version = SCSI_REV_SPC;
} else if (mpt->is_sas) {
cpi->hba_misc = PIM_NOBUSRESET;
cpi->base_transfer_speed = 300000;
cpi->hba_inquiry = PI_TAG_ABLE;
- cpi->transport = XPORT_SAS;
- cpi->transport_version = 0;
+ cpi->transport = XPORT_SAS;
+ cpi->transport_version = 0;
+ cpi->protocol_version = SCSI_REV_SPC2;
} else {
cpi->hba_misc = PIM_SEQSCAN;
cpi->base_transfer_speed = 3300;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
- cpi->transport = XPORT_SPI;
- cpi->transport_version = 2;
+ cpi->transport = XPORT_SPI;
+ cpi->transport_version = 2;
+ cpi->protocol_version = SCSI_REV_2;
}
- cpi->protocol = PROTO_SCSI;
- cpi->protocol_version = SCSI_REV_2;
/*
* We give our fake RAID passhtru bus a width that is MaxVolumes
- * wide, restrict it to one lun and have it *not* be a bus
- * that can have a SCSI bus reset.
+ * wide and restrict it to one lun.
*/
if (raid_passthru) {
cpi->max_target = mpt->ioc_page2->MaxPhysDisks - 1;
cpi->initiator_id = cpi->max_target + 1;
cpi->max_lun = 0;
- cpi->hba_misc |= PIM_NOBUSRESET;
}
if ((mpt->role & MPT_ROLE_INITIATOR) == 0) {
@@ -3297,7 +3292,14 @@
uint8_t dval, pval, oval;
int rv;
- if (xpt_path_sim(cts->ccb_h.path) == mpt->phydisk_sim) {
+ cts->protocol = PROTO_SCSI;
+ cts->protocol_version = SCSI_REV_2;
+ cts->transport = XPORT_SPI;
+ cts->transport_version = 2;
+
+ if (cts->type == CTS_TYPE_USER_SETTINGS) {
+ tgt = cts->ccb_h.target_id;
+ } else if (xpt_path_sim(cts->ccb_h.path) == mpt->phydisk_sim) {
if (mpt_map_physdisk(mpt, (union ccb *)cts, &tgt)) {
return (-1);
}
@@ -3306,8 +3308,10 @@
}
/*
- * XXX: We aren't looking Port Page 2 BIOS settings here.
- * XXX: For goal settings, we pick the max from port page 0
+ * We aren't looking at Port Page 2 BIOS settings here-
+ * sometimes these have been known to be bogus XXX.
+ *
+ * For user settings, we pick the max from port page 0
*
* For current settings we read the current settings out from
* device page 0 for that target.
@@ -3336,30 +3340,24 @@
pval = (tmp.NegotiatedParameters >> 8) & 0xff;
mpt->mpt_dev_page0[tgt] = tmp;
} else {
- /*
- * XXX: Just make theoretical maximum.
- */
dval = DP_WIDE|DP_DISC_ENABLE|DP_TQING_ENABLE;
oval = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff;
pval = (mpt->mpt_port_page0.Capabilities >> 8) & 0xff;
}
- cts->protocol = PROTO_SCSI;
- cts->protocol_version = SCSI_REV_2;
- cts->transport = XPORT_SPI;
- cts->transport_version = 2;
- scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
- spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
+ spi->valid = 0;
+ scsi->valid = 0;
+ spi->flags = 0;
+ scsi->flags = 0;
if (dval & DP_DISC_ENABLE) {
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
- if (dval & DP_TQING_ENABLE) {
- scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
+ if (oval) {
+ spi->sync_offset = oval;
+ spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
}
- if (oval && pval) {
- spi->sync_offset = oval;
+ if (pval) {
spi->sync_period = pval;
- spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
}
spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
@@ -3368,6 +3366,9 @@
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
+ if (dval & DP_TQING_ENABLE) {
+ scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
+ }
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
@@ -3375,8 +3376,9 @@
scsi->valid = 0;
}
mpt_lprt(mpt, MPT_PRT_NEGOTIATION,
- "mpt_get_spi_settings[%d]: %s 0x%x period 0x%x offset %d\n", tgt,
- IS_CURRENT_SETTINGS(cts)? "ACTIVE" : "NVRAM ", dval, pval, oval);
+ "mpt_get_spi_settings[%d]:%s per=%x off=%d spv=%x scv=%x\n",
+ tgt, IS_CURRENT_SETTINGS(cts)? "ACTIVE" : "NVRAM ", pval, oval,
+ spi->valid, scsi->valid);
return (0);
}
@@ -3566,7 +3568,7 @@
}
tmf_req->TaskMsgContext = abort_ctx;
- mpt_lprt(mpt, MPT_PRT_INFO,
+ mpt_lprt(mpt, MPT_PRT_DEBUG,
"Issuing TMF %p:%u with MsgContext of 0x%x\n", mpt->tmf_req,
mpt->tmf_req->serno, tmf_req->MsgContext);
if (mpt->verbose > MPT_PRT_DEBUG) {
@@ -3578,6 +3580,8 @@
TAILQ_INSERT_HEAD(&mpt->request_pending_list, mpt->tmf_req, links);
error = mpt_send_handshake_cmd(mpt, sizeof(*tmf_req), tmf_req);
if (error != MPT_OK) {
+ TAILQ_REMOVE(&mpt->request_pending_list, mpt->tmf_req, links);
+ mpt->tmf_req->state = REQ_STATE_FREE;
mpt_reset(mpt, TRUE);
}
return (error);
_______________________________________________
p4-projects@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/p4-projects
To unsubscribe, send any mail to "p4-projects-unsubscribe@xxxxxxxxxxx"
|
|