|
|
http://perforce.freebsd.org/chv.cgi?CH=87114
Change 87114 by soc-andrew@soc-andrew_serv on 2005/11/23 06:18:18
Update the BSD Installer
Affected files ...
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/install/220_format_disk.lua#3
edit
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/network.lua#4
edit
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/package.lua#4
edit
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/storage.lua#4
edit
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/target_system.lua#5
edit
..
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/target_system_ui.lua#3
edit
Differences ...
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/install/220_format_disk.lua#3
(text+ko) ====
@@ -1,12 +1,113 @@
--- $Id: 220_format_disk.lua,v 1.13 2005/10/05 21:29:03 cpressey Exp $
+-- $Id: 220_format_disk.lua,v 1.14 2005/10/12 00:50:12 cpressey Exp $
--
-- Allow the user to format the selected disk, if they so desire.
--
+--
+-- Utility function which asks the user what geometry they'd like to use.
+--
+local select_geometry = function(step, dd)
+ local c_cyl, c_head, c_sec = dd:get_geometry()
+ local geom_msg = _(
+ "The system is reports that the geometry of %s is\n\n" ..
+ "%d cylinders, %d heads, %d sectors\n\n",
+ dd:get_name(),
+ dd:get_geometry_cyl(),
+ dd:get_geometry_head(),
+ dd:get_geometry_sec()
+ )
+ local valid_msg
+ if dd:is_geometry_bios_friendly() then
+ valid_msg = _(
+ "This geometry should enable you to boot from " ..
+ "this disk. Unless you have a pressing reason " ..
+ "to do otherwise, it is recommended that you use " ..
+ "it.\n\n"
+ )
+ else
+ c_cyl, c_head, c_sec = dd:get_normalized_geometry()
+ valid_msg = _(
+ "This geometry will NOT enable you to boot from " ..
+ "this disk! Unless you have a pressing reason " ..
+ "to do otherwise, it is recommended that you use " ..
+ "the following modified geometry:\n\n" ..
+ "%d cylinders, %d heads, %d sectors\n\n",
+ c_cyl, c_head, c_sec
+ )
+ end
+ local end_msg = _(
+ "If you don't understand what any of this means, just " ..
+ "select 'Use this Geometry' to continue."
+ )
+
+ local response = App.ui:present{
+ id = "select_geometry",
+ name = _("Select Geometry"),
+ short_desc = geom_msg .. valid_msg .. end_msg,
+
+ fields = {
+ {
+ id = "cyl",
+ name = _("Cylinders"),
+ short_desc = _("Enter the number of cylinders in this
disk's geometry")
+ },
+ {
+ id = "head",
+ name = _("Heads"),
+ short_desc = _("Enter the number of heads in this disk's
geometry")
+ },
+ {
+ id = "sec",
+ name = _("Sectors"),
+ short_desc = _("Enter the number of sectors in this disk's
geometry")
+ },
+ },
+
+ datasets = {
+ {
+ cyl = tostring(c_cyl),
+ head = tostring(c_head),
+ sec = tonumber(c_sec)
+ }
+ },
+
+ actions = {
+ {
+ id = "ok",
+ name = _("Use this Geometry")
+ },
+ {
+ id = "cancel",
+ accelerator = "ESC",
+ name = _("Return to %s", step:get_prev_name())
+ }
+ }
+ }
+
+ if response.action_id == "ok" then
+ dd:set_geometry(
+ tonumber(response.datasets[1].cyl),
+ tonumber(response.datasets[1].head),
+ tonumber(response.datasets[1].sec)
+ )
+ return true
+ else
+ return false
+ end
+end
+
+--
+-- Utility function which confirms that the user would like to proceed,
+-- and actually executes the formatting commands.
+--
local format_disk = function(step, dd)
local cmds = CmdChain.new()
+ if not select_geometry(step, dd) then
+ return false
+ end
+
dd:cmds_format(cmds)
local confirm = function()
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/network.lua#4
(text+ko) ====
@@ -1,4 +1,4 @@
--- $Id: network.lua,v 1.21 2005/09/02 22:07:53 cpressey Exp $
+-- $Id: network.lua,v 1.22 2005/11/10 16:38:02 cpressey Exp $
-- Lua abstraction for the Network Interfaces of a system.
--
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/package.lua#4
(text+ko) ====
@@ -93,7 +93,7 @@
--
method.is_archived_on = function(ps, ts)
local filename = App.expand(
- "${root}${base}usr/ports/packages/All/${name}.${suffix}",
+ "${root}${base}usr/packages/All/${name}.${suffix}",
{
base = ts:get_base(),
name = name,
@@ -119,7 +119,7 @@
if self:is_archived_on(ts) then
cmd = App.expand(
"${root}${TAR} -O -z -x -f " ..
-
"${root}usr/ports/packages/All/${pkg_name}.${suffix} " ..
+ "${root}usr/packages/All/${pkg_name}.${suffix} "
..
"+CONTENTS | ${root}${GREP} '^@pkgdep'", {
base = ts:get_base(),
pkg_name = self:get_name(),
@@ -253,7 +253,7 @@
--
if self:is_archived_on(App.state.source) then
cmds:add(
- "${root}${CP}
${root}usr/ports/packages/All/${pkg_name}.${pkg_suffix} " ..
+ "${root}${CP}
${root}usr/packages/All/${pkg_name}.${pkg_suffix} " ..
"${root}${base}${pkg_tmp}/${pkg_name}.${pkg_suffix}"
)
else
@@ -485,7 +485,7 @@
--
method.enumerate_archived_on = function(self, ts)
self:enumerate_archives_in(
- App.expand("${root}${base}usr/ports/packages/All", {
+ App.expand("${root}${base}usr/packages/All", {
base = ts:get_base()
})
)
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/storage.lua#4
(text+ko) ====
@@ -1,4 +1,4 @@
--- $Id: storage.lua,v 1.177 2005/10/05 20:27:40 cpressey Exp $
+-- $Id: storage.lua,v 1.182 2005/10/28 02:48:02 cpressey Exp $
-- Storage Descriptors (a la libinstaller) in Lua.
--
@@ -685,6 +685,46 @@
return sec
end
+ method.set_geometry = function(self, c, h, s)
+ cyl = c or cyl
+ head = h or head
+ sec = s or sec
+ end
+
+ --
+ -- Determine whether the geometry of the disk is "BIOS friendly"
+ -- or not, i.e., whether the C/H/S parameters are within the
+ -- limits of what is supported by legacy means of reading the
+ -- disk (int 13h), which are required during e.g. booting.
+ --
+ -- This is needed because sometimes the system reports a
+ -- geometry for an unformatted disk as having some number of
+ -- sectors per track, such as 255, that will not permit booting
+ -- from the BIOS.
+ --
+ -- XXX It is also possible that some systems require the number
+ -- of heads to be 16 or less, especially if they are set to
+ -- use "LBA" geometry translation.
+ --
+ method.is_geometry_bios_friendly = function(self)
+ return sec >= 1 and sec <= 63
+ end
+
+ --
+ -- Find a "BIOS-friendly" geometry that corresponds to the
+ -- capacity of this disk, so we can at least boot from it.
+ --
+ method.get_normalized_geometry = function(self)
+ --
+ -- Convert to something that the BIOS can boot from.
+ --
+ local sec = 63
+ local head = 255
+ local cyl = math.floor(capacity:in_units("S") / (sec * head))
+
+ return cyl, head, sec
+ end
+
--
-- Return the name of the device which handles this disk.
-- Note that, on all currently supported operating systems,
@@ -907,28 +947,89 @@
end
--
- -- Create commands to format (create one big partition on) this disk.
+ -- Create commands to format this disk. 'Format' in this sense
+ -- means to create one big partition, and to install a partition
+ -- table with the appropriate information in it.
--
method.cmds_format = function(self, cmds)
self:cmds_ensure_dev(cmds)
--
- -- Currently you need to pass 'yes' to OpenBSD's fdisk to
- -- be able to do these. (XXX this is a shot in the dark)
+ -- Initialize the disk.
+ --
+ cmds:add("${root}${FDISK} -I " ..
+ self:get_raw_device_name())
+
+ --
+ -- Under more pleasant conditions, we could just
+ -- shell 'fdisk -BI' here and be done with it.
+ -- However, life is not that simple. In order to
+ -- get fdisk to honour the geometry we have
+ -- selected, we need to create a fdisk script which
+ -- tells fdisk exactly the geometry of the disk and
+ -- the size of the partition we'd like to make.
+ --
+ cmds:add{
+ cmdline = "${root}${ECHO} 'g c${cyl} h${head} s${sec}'
>${tmp}format.fdisk",
+ replacements = {
+ cyl = cyl,
+ head = head,
+ sec = sec
+ }
+ }
+
+ --
+ -- Allot the first partition as taking up the entire disk,
+ -- assuming the given geometry. This means that the part:
+ -- * has the default sysid (depends on the operating system);
+ -- * starts at the first track (after the zero'th track,)
+ -- * extends to the end of the disk.
+ --
+ cmds:add{
+ cmdline = "${root}${ECHO} 'p 1 ${sysid} ${start} ${size}'
>>${tmp}format.fdisk",
+ replacements = {
+ sysid = App.conf.default_sysid,
+ start = sec,
+ size = (cyl * head * sec) - sec
+ }
+ }
+
+ --
+ -- Mark the other partitions as unused.
+ -- Mark the first partition as the active one.
+ -- Send a copy of this script to the log, and make sure
+ -- the system knows that it should delete it when done.
+ --
+ cmds:add(
+ "${root}${ECHO} 'p 2 0 0 0' >>${tmp}format.fdisk",
+ "${root}${ECHO} 'p 3 0 0 0' >>${tmp}format.fdisk",
+ "${root}${ECHO} 'p 4 0 0 0' >>${tmp}format.fdisk",
+ "${root}${ECHO} 'a 1' >>${tmp}format.fdisk",
+ "${root}${CAT} ${tmp}format.fdisk"
+ )
+ App.register_tmpfile("format.fdisk")
+
+ --
+ -- Execute the fdisk script.
--
- if App.conf.os.name == "OpenBSD" then -- XXXXXX
- cmds:add("${root}${ECHO} 'yes\nyes\nyes\n' | " ..
- "${root}${FDISK} -I " ..
- self:get_raw_device_name())
- cmds:add("${root}${ECHO} 'yes\nyes\nyes\n' | " ..
- "${root}${FDISK} -B " ..
- self:get_raw_device_name())
+ if App.conf.os.name == "NetBSD" then -- XXXXXX
+ -- XXX Going to need to do this differently
else
- cmds:add("${root}${FDISK} -I " ..
- self:get_raw_device_name())
- cmds:add("${root}${YES} | ${root}${FDISK} -B " ..
- self:get_raw_device_name())
+ cmds:add("${root}${FDISK} -v -f ${tmp}format.fdisk " ..
+ self:get_device_name())
end
+
+ --
+ -- Show the new state of the disk in the log.
+ --
+ cmds:add("${root}${FDISK} " ..
+ self:get_device_name())
+
+ --
+ -- Make the disk bootable.
+ --
+ cmds:add("${root}${YES} | ${root}${FDISK} -B " ..
+ self:get_raw_device_name())
end
--
@@ -1107,20 +1208,28 @@
end
--
- -- Probe the (BIOS) geometry and the capacity of the disk.
- -- Returns true, then the geometry (C, H, S,) then the capacity,
- -- if all went well. Returns nil and an error message if not.
+ -- Probe the (BIOS) geometry of the disk.
+ -- Returns three values: cylinder, head, and sec/trk, if all went well.
+ -- Returns nil values if all did not go well.
+ -- Capacity in sectors can then be calculated by C * H * S, or an error
+ -- can be flagged, by the caller of this function.
+ --
-- This is the FreeBSD/DragonFly version of this function.
--
local probe_geometry_freebsd = function(self)
- local cyl, head, sec, capacity
+ local cyl, head, sec
--
- -- Tell 'fdisk' to pretend to initialize the disk and
- -- parse its output, to determine total # of sectors.
+ -- Tell 'fdisk' to give us the rundown of the disk.
+ -- Note that this does not use the 'summary' (-s)
+ -- feature of fdisk, because that feature has markedly
+ -- different behaviour when the disk is blank or
+ -- otherwise has an invalid boot sector: it fails
+ -- immediately. Whereas we need it to provide at least
+ -- the geometry (even if the part table is ficticious.)
--
local cmd = App.expand(
- "${root}${FDISK} -t -I " .. self:get_raw_device_name()
+ "${root}${FDISK} " .. self:get_raw_device_name()
)
local pty = Pty.Logged.open(cmd, App.log_string)
if not pty then
@@ -1128,53 +1237,43 @@
end
local line = pty:readline()
while line do
- local found_size, len, start, size =
- string.find(line,
"start%s*(%d+)%s*,%s*size%s*(%d+)")
- if found_size then
- capacity = Storage.Capacity.new(
- tonumber(start) + tonumber(size), "S"
- )
- end
- local found_bios_geom =
- string.find(line, "^%s*parameters to be used for
BIOS")
- line = pty:readline()
- if found_bios_geom then
+ if string.find(line, "^%s*parameters to be used for
BIOS") then
--
-- Parse the line following.
--
+ line = pty:readline()
found, len, cyl, head, sec =
string.find(line,
"^%s*cylinders=(%d+)%s*heads=(%d+)%s*" ..
"sectors/track=(%d+)")
- cyl = tonumber(cyl)
- head = tonumber(head)
- sec = tonumber(sec)
- found_bios_geom = false
+ if found then
+ cyl = tonumber(cyl)
+ head = tonumber(head)
+ sec = tonumber(sec)
+ end
+ line = pty:readline()
+ else
+ --
+ -- Keep looking...
+ --
line = pty:readline()
end
end
pty:close()
- if not cyl or not head or not sec then
- return nil, string.format(
- "could not determine geometry of disk '%s'", name
- )
- end
- if not capacity then
- return nil, string.format(
- "could not determine capacity of disk '%s'", name
- )
- end
- return true, cyl, head, sec, capacity
+ return cyl, head, sec
end
--
- -- Probe the (BIOS) geometry and the capacity of the disk.
- -- Returns true, then the geometry (C, H, S,) then the capacity,
- -- if all went well. Returns nil and an error message if not.
+ -- Probe the (BIOS) geometry of the disk.
+ -- Returns three values: cylinder, head, and sec/trk, if all went well.
+ -- Returns nil values if all did not go well.
+ -- Capacity in sectors can then be calculated by C * H * S, or an error
+ -- can be flagged, by the caller of this function.
+ --
-- This is the NetBSD version of this function.
--
local probe_geometry_netbsd = function(self)
- local cyl, head, sec, capacity
+ local cyl, head, sec
--
-- Call 'fdisk' and parse its output.
@@ -1188,13 +1287,6 @@
end
local line = pty:readline()
while line do
- local found_size, len, size =
- string.find(line, "^%s*total%s*sectors:%s*(%d+)")
- if found_size then
- capacity = Storage.Capacity.new(
- tonumber(size), "S"
- )
- end
local found_bios_geom =
string.find(line,
"^%s*NetBSD%s*disklabel%s*disk%s*geometry")
line = pty:readline()
@@ -1214,17 +1306,7 @@
end
pty:close()
- if not cyl or not head or not sec then
- return nil, string.format(
- "could not determine geometry of disk '%s'", name
- )
- end
- if not capacity then
- return nil, string.format(
- "could not determine capacity of disk '%s'", name
- )
- end
- return true, cyl, head, sec, capacity
+ return cyl, head, sec
end
local probe_partitions_freebsd = function(self)
@@ -1381,18 +1463,25 @@
local success
if App.conf.os.name == "NetBSD" then -- XXXXXX netbsd needs its
own subclass here
- success, cyl, head, sec, capacity =
+ cyl, head, sec =
probe_geometry_netbsd(self)
else
- success, cyl, head, sec, capacity =
+ cyl, head, sec =
probe_geometry_freebsd(self)
end
- if not success then
- App.log_warn(cyl) -- 'cyl' is the error message
+ if not cyl or not head or not sec then
+ App.log_warn(
+ "could not determine geometry of disk '%s'", name
+ )
return false
end
+ --
+ -- Calculate disk's capacity from its geometry.
+ --
+ capacity = Storage.Capacity.new(cyl * head * sec, "S")
+
App.log("Disk " .. name .. " (" .. desc .. "): " ..
capacity:format() .. ": " ..
cyl .. "/" .. head .. "/" .. sec)
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/target_system.lua#5
(text+ko) ====
@@ -413,9 +413,9 @@
dir = src
end
cmds:add{
- cmdline = "${root}${TAR} " ..
- "-x -C ${root}${base}${dest} -f " ..
-
"${root}usr/${uname}/${dir}/${src}.${dist_suffix}",
+ cmdline = "${root}${TAR} -f " ..
+
"${root}usr/${uname}/${dir}/${src}.${dist_suffix}" ..
+ "-x -C ${root}${base}${dest}"
replacements = {
base = base,
src = src,
====
//depot/projects/soc2005/bsdinstaller/src/contrib/bsdinstaller/backend/lua/lib/target_system_ui.lua#3
(text+ko) ====
@@ -1,4 +1,4 @@
--- $Id: target_system_ui.lua,v 1.15 2005/08/26 04:25:25 cpressey Exp $
+-- $Id: target_system_ui.lua,v 1.16 2005/10/12 00:43:51 cpressey Exp $
--
-- Copyright (c)2005 Chris Pressey. All rights reserved.
@@ -49,579 +49,579 @@
end
TargetSystemUI.set_root_password = function(ts)
- local done = false
- local result
- local cmds
- local form = {
- id = "root_passwd",
- name = _("Set Root Password"),
- short_desc = _(
- "Here you can set the super-user (root) password."
- ),
-
- fields = {
- {
- id = "root_passwd_1",
- name = _("Root Password"),
- short_desc = _("Enter the root password you would
like to use"),
- obscured = "true"
- },
- {
- id = "root_passwd_2",
- name = _("Re-type Root Password"),
- short_desc = _("Enter the same password again to
confirm"),
- obscured = "true"
- }
- },
-
- actions = {
- {
- id = "ok",
- name = _("Accept and Set Password")
- },
- {
- id = "cancel",
- accelerator = "ESC",
- name = _("Return to Configure Menu")
- }
- },
-
- datasets = {
- { root_passwd_1 = "", root_passwd_2 = "" }
- }
+ local done = false
+ local result
+ local cmds
+ local form = {
+ id = "root_passwd",
+ name = _("Set Root Password"),
+ short_desc = _(
+ "Here you can set the super-user (root) password."
+ ),
+
+ fields = {
+ {
+ id = "root_passwd_1",
+ name = _("Root Password"),
+ short_desc = _("Enter the root password you would like to
use"),
+ obscured = "true"
+ },
+ {
+ id = "root_passwd_2",
+ name = _("Re-type Root Password"),
+ short_desc = _("Enter the same password again to confirm"),
+ obscured = "true"
+ }
+ },
+
+ actions = {
+ {
+ id = "ok",
+ name = _("Accept and Set Password")
+ },
+ {
+ id = "cancel",
+ accelerator = "ESC",
+ name = _("Return to Configure Menu")
}
-
- while not done do
- result = ui:present(form)
-
- if result.action_id == "ok" then
- form.datasets = result.datasets
+ },
+
+ datasets = {
+ { root_passwd_1 = "", root_passwd_2 = "" }
+ }
+ }
+
+ while not done do
+ result = ui:present(form)
+
+ if result.action_id == "ok" then
+ form.datasets = result.datasets
+
+ --
+ -- Fetch form field values.
+ --
+
+ local root_passwd_1 = result.datasets[1].root_passwd_1
+ local root_passwd_2 = result.datasets[1].root_passwd_2
+ -- XXX validate password for bad characters here XXX
+
+ if root_passwd_1 == root_passwd_2 then
--
- -- Fetch form field values.
+ -- Passwords match, so set the root password.
--
-
- local root_passwd_1 =
result.datasets[1].root_passwd_1
- local root_passwd_2 =
result.datasets[1].root_passwd_2
-
- -- XXX validate password for bad characters
here XXX
-
- if root_passwd_1 == root_passwd_2 then
- --
- -- Passwords match, so set the root
password.
- --
- cmds = CmdChain.new()
- ts:cmds_set_password(cmds,
- "root", root_passwd_1)
- if cmds:execute() then
- ui:inform(
- _("The root password has
been changed.")
- )
- done = true
- else
- ui:inform(
- _("An error occurred when "
..
- "setting the root
password.")
- )
- done = false
- end
+ cmds = CmdChain.new()
+ ts:cmds_set_password(cmds,
+ "root", root_passwd_1)
+ if cmds:execute() then
+ ui:inform(
+ _("The root password has been
changed.")
+ )
+ done = true
else
- --
- -- Passwords don't match - tell the
user, let them try again.
- --
ui:inform(
- _("The passwords do not match.")
+ _("An error occurred when " ..
+ "setting the root password.")
)
done = false
end
else
- -- Cancelled
- done = true
+ --
+ -- Passwords don't match - tell the user, let
them try again.
+ --
+ ui:inform(
+ _("The passwords do not match.")
+ )
+ done = false
end
+ else
+ -- Cancelled
+ done = true
end
+ end
end
TargetSystemUI.add_user = function(ts)
- local done = false
- local result
- local cmds
+ local done = false
+ local result
+ local cmds
- --
- -- Predicates which validate entered data.
- --
- local is_gecos_clean = function(gecos)
- local i, char
+ --
+ -- Predicates which validate entered data.
+ --
+ local is_gecos_clean = function(gecos)
+ local i, char
- i = 1
- while i <= string.len(gecos) do
- char = string.sub(gecos, i, i)
- if string.find(char, "%c") or -- no
ctrl chars
- string.byte(char) == 127 or -- no
'DEL' char
- string.find(":!@", char, 1, true) then --
none of these
- return false
- end
- i = i + 1
+ i = 1
+ while i <= string.len(gecos) do
+ char = string.sub(gecos, i, i)
+ if string.find(char, "%c") or -- no ctrl
chars
+ string.byte(char) == 127 or -- no 'DEL'
char
+ string.find(":!@", char, 1, true) then -- none of
these
+ return false
end
+ i = i + 1
+ end
- return true
- end
+ return true
+ end
- local is_name_clean = function(name)
- local i, char
+ local is_name_clean = function(name)
+ local i, char
- i = 1
- while i <= string.len(name) do
- char = string.sub(name, i, i)
- if string.find(char, "%c") or -- no
ctrl chars
- string.byte(char) == 127 or -- no
'DEL' char
- string.byte(char) > 127 or -- no
8-bit chars
- -- and
none of these:
- string.find(" ,\t:+&#%^()!@~*?<>=|\\/\"",
char, 1, true) or
- (char == "-" and i == 1) or -- no
'-' at start
- -- '$'
only at end:
- (char == "$" and i ~= string.len(name)) then
- return false
- end
- i = i + 1
+ i = 1
+ while i <= string.len(name) do
+ char = string.sub(name, i, i)
+ if string.find(char, "%c") or -- no ctrl chars
+ string.byte(char) == 127 or -- no 'DEL' char
+ string.byte(char) > 127 or -- no 8-bit
chars
+ -- and none of
these:
+ string.find(" ,\t:+&#%^()!@~*?<>=|\\/\"", char, 1,
true) or
+ (char == "-" and i == 1) or -- no '-' at
start
+ -- '$' only at
end:
+ (char == "$" and i ~= string.len(name)) then
+ return false
end
+ i = i + 1
+ end
- return true
- end
+ return true
+ end
- local is_filename_clean = function(filename) -- XXX
incomplete
- return true
- end
+ local is_filename_clean = function(filename) -- XXX incomplete
+ return true
+ end
- local is_uid_clean = function(uid) -- XXX
incomplete
- return true
- end
+ local is_uid_clean = function(uid) -- XXX incomplete
+ return true
+ end
- local is_grouplist_clean = function(grouplist) -- XXX
incomplete
- return true
- end
+ local is_grouplist_clean = function(grouplist) -- XXX incomplete
+ return true
+ end
- --
- -- Description of the form to display.
- --
- local form = {
- id = "add_user",
- name = _("Add User"),
- short_desc = _("Here you can add a user to an installed
system.\n\n" ..
- "You can leave the Home Directory, User ID, and Login
Group " ..
- "fields empty if you want these items to be
automatically " ..
- "allocated by the system."),
- fields = {
- {
- id = "username",
- name = _("Username"),
- short_desc = _("Enter the username the user will
log in as")
- },
- {
- id = "gecos",
- name = _("Real Name"),
- short_desc = _("Enter the real name (or GECOS
field) of this user")
- },
- {
- id = "passwd_1",
- name = _("Password"),
- short_desc = _("Enter the user's password (will not
be displayed)"),
- obscured = "true"
- },
- {
- id = "passwd_2",
- name = _("Password (Again)"),
- short_desc = _("Re-enter the user's password to
confirm"),
- obscured = "true"
- },
- {
- id = "shell",
- name = _("Shell"),
- short_desc = _("Enter the full path to the user's
shell program")
- },
- {
- id = "home",
- name = _("Home Directory"),
- short_desc = _("Enter the full path to the user's
home directory, or leave blank")
- },
- {
- id = "uid",
- name = _("User ID"),
- short_desc = _("Enter this account's numeric user
id, or leave blank")
- },
- {
- id = "group",
- name = _("Login Group"),
- short_desc = _("Enter the primary group for this
account, or leave blank")
- },
- {
- id = "groups",
- name = _("Other Group Memberships"),
- short_desc = _(
- "Enter a comma-separated list of other groups "
..
- "that this user should belong to"
- )
- }
- },
- actions = {
- {
- id = "ok",
- name = _("Accept and Add User")
- },
- {
- id = "cancel",
- accelerator = "ESC",
- name = _("Return to Configure Menu")
- }
- },
- datasets = {
- {
- username = "",
- gecos = "",
- passwd_1 = "",
- passwd_2 = "",
- shell = "/bin/tcsh",
- home = "",
- uid = "",
- group = "",
- groups = ""
- }
- }
+ --
+ -- Description of the form to display.
+ --
+ local form = {
+ id = "add_user",
+ name = _("Add User"),
+ short_desc = _("Here you can add a user to an installed
system.\n\n" ..
+ "You can leave the Home Directory, User ID, and Login Group "
..
+ "fields empty if you want these items to be automatically "
..
+ "allocated by the system."),
+ fields = {
+ {
+ id = "username",
+ name = _("Username"),
+ short_desc = _("Enter the username the user will log in as")
+ },
+ {
+ id = "gecos",
+ name = _("Real Name"),
+ short_desc = _("Enter the real name (or GECOS field) of
this user")
+ },
+ {
+ id = "passwd_1",
+ name = _("Password"),
+ short_desc = _("Enter the user's password (will not be
displayed)"),
+ obscured = "true"
+ },
+ {
+ id = "passwd_2",
+ name = _("Password (Again)"),
+ short_desc = _("Re-enter the user's password to confirm"),
+ obscured = "true"
+ },
+ {
+ id = "shell",
+ name = _("Shell"),
+ short_desc = _("Enter the full path to the user's shell
program")
+ },
+ {
+ id = "home",
+ name = _("Home Directory"),
+ short_desc = _("Enter the full path to the user's home
directory, or leave blank")
+ },
+ {
+ id = "uid",
+ name = _("User ID"),
+ short_desc = _("Enter this account's numeric user id, or
leave blank")
+ },
+ {
+ id = "group",
+ name = _("Login Group"),
+ short_desc = _("Enter the primary group for this account,
or leave blank")
+ },
+ {
+ id = "groups",
+ name = _("Other Group Memberships"),
+ short_desc = _(
+ "Enter a comma-separated list of other groups " ..
+ "that this user should belong to"
+ )
+ }
+ },
+ actions = {
+ {
+ id = "ok",
+ name = _("Accept and Add User")
+ },
+ {
+ id = "cancel",
+ accelerator = "ESC",
+ name = _("Return to Configure Menu")
+ }
+ },
+ datasets = {
+ {
+ username = "",
+ gecos = "",
+ passwd_1 = "",
+ passwd_2 = "",
+ shell = "/bin/tcsh",
+ home = "",
+ uid = "",
+ group = "",
+ groups = ""
}
+ }
+ }
+
+ --
+ -- Main loop which repeatedly displays the form until either
+ -- the user cancels or everything validates.
+ --
+ while not done do
+ result = ui:present(form)
+ if result.action_id == "ok" then
+ form.datasets = result.datasets
>>> TRUNCATED FOR MAIL (1000 lines) <<<
_______________________________________________
p4-projects@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/p4-projects
To unsubscribe, send any mail to "p4-projects-unsubscribe@xxxxxxxxxxx"
|
|