|
|
On Tue, Apr 30, 2002 at 05:02:59PM -0800, Carlos Horacio Silva Elizondo wrote:
> Hello, Everybody I'm new on this list, I'm looking for a sample o some
> script to route 2 ethernet cards
> eth0 static IP for internet
> eth1 DHCP server 192.168.1.1
> does any one have a sample or what lines i have to write to make
> my server works.
> do I have to change my route.conf too?
Do this:
# ip ro add default dev eth0
# echo 1 > /proc/sys/net/ipv4/ip_forward
You should be good to go with lots of wholes and besides the
192.168 netblock would never see any responses back.
Then you do:
# iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to <your static ip>
This makes sure that your private LAN can get out meaningfully.
Then go and read alot on iptables to _harden_ your box ;-)
Ramin
> thanks a lot!
> Carlos Silva
|
|