[email protected]
[Top] [All Lists]

Re: kern/35545 (NetBSD-current will not boot with AHCI and Lite-On SATA

Subject: Re: kern/35545 NetBSD-current will not boot with AHCI and Lite-On SATA CD
From: Hisashi T Fujinaka
Date: Sat, 30 Jun 2007 22:55:42 UTC
Newsgroups: fa.netbsd.bugs

On Fri, 29 Jun 2007, bouyer@xxxxxxxxxx wrote:

I've commited a workaround in current; at last now the kernel should not
panic (but still won't see the CD). Can you confirm ?

I believe it works. Here's part of my dmesg where I think it used to

jmide0 at pci4 dev 0 function 0: JMicron Technology JMB363 SATA/PATA controller
jmide0: 1 PATA port, 2 SATA ports
jmide0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0 at jmide0
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is unused
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is PATA
atabus2 at jmide0 channel 1

Hisashi T Fujinaka - htodd@xxxxxxxxxxxx
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte

<Prev in Thread] Current Thread [Next in Thread>