|
|
Hi,
Just an after thought,the port in Lexmark 3500/4500 series Properties
where the printer is set on is USB Virtual printer port,when I configure this
setting I get error message:
an error occured during port configuration,this operation is NOT supported:
There is another port shown in port properties:
Lex... Lexmark Print-2-Fax when this box is ticked there is an option th
enter the path to the application to associate with the port
Don't know if this is beneficial but thought I should mention it.
regards
aga
"thecreator" wrote:
> Hi aga,
>
> What firewall are you using? Brand, plus version.
>
> I have a Lexmark X6570 and using it Wirelessly. When I installed it,
> with the McAfee Personal Firewall Plus installed, I had set the Firewall to
> Open. When finished, I changed the setting back to Tight. Working fine.
> Never disable the Firewall.
>
>
> --
> thecreator
>
>
>
> "aga151" <aga151@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:4E876B43-7A1E-44A3-B81D-9B9B9016A625@xxxxxxxxxxxxxxxx
> > Hi creator,
> > Thanks for your help,got all done as you requested,the
> > printer
> > is connected through the USB port,been having major probs with this
> > one,had a
> > diagnostic check done by Lexmark and they told me it was a firewall
> > problem?
> > not anything to do after another check was done then they said it is an
> > issue
> > with microsoft and that the spooler was NOT running,contact microsoft and
> > they would assist with the correct updates,well, they were not much help
> > this
> > is why I came to communities.
> > Done all as you suggested and I am now being told that
> > theprinter cannot communicate with the printer,this is after the user
> > details
> > window appears and that I should connect to the FAX modem!! I pointed out
> > that the printer worked initially with out being connected to 'fax'
> > modem,now
> > I have got you to answer the last 2 questions can you figure out why the
> > printer will not print,the printer never needed to find the modem when
> > newly
> > installed,total mystery,anyway thanks for your help,much appreciated
> > regards
> > aga
> >
> > "thecreator" wrote:
> >
> >> Hi aga,
> >>
> >> Click on Printers and Faxes and right-click on the Lexmark 4580
> >> Printer
> >> Icon and click Properties. Click Ports. Make sure Enable bidirectional
> >> support is checked, if not , check it and click Apply, then OK.
> >>
> >> If the Spooler is not running, Click Start > Control Panel >
> >> Administrative Tools > Services. Scroll down and look for Printer
> >> Spooler.
> >> Make sure the Startup Type is set to Automatic. and it is started.
> >>
> >>
> >> --
> >> thecreator
> >>
> >> "aga151" <aga151@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> news:B8BA7CB9-99AB-4521-B89E-071FB95C5496@xxxxxxxxxxxxxxxx
> >> > Hi,
> >> > Having lots of problems with my Lexmark X4580 all-in-one printer
> >> > running
> >> > in Windows XP Home.
> >> > Spooler is not running and now I'm told that I need to : Enable
> >> > Bidirectional Communications, can anyone offer help on this please
> >> >
> >> > regards
> >> > aga
> >>
> >>
> >>
>
>
>
|
|