|
|
Hi creator,
Thanks for your help,got all done as you requested,the printer
is connected through the USB port,been having major probs with this one,had a
diagnostic check done by Lexmark and they told me it was a firewall problem?
not anything to do after another check was done then they said it is an issue
with microsoft and that the spooler was NOT running,contact microsoft and
they would assist with the correct updates,well, they were not much help this
is why I came to communities.
Done all as you suggested and I am now being told that
theprinter cannot communicate with the printer,this is after the user details
window appears and that I should connect to the FAX modem!! I pointed out
that the printer worked initially with out being connected to 'fax' modem,now
I have got you to answer the last 2 questions can you figure out why the
printer will not print,the printer never needed to find the modem when newly
installed,total mystery,anyway thanks for your help,much appreciated
regards
aga
"thecreator" wrote:
> Hi aga,
>
> Click on Printers and Faxes and right-click on the Lexmark 4580 Printer
> Icon and click Properties. Click Ports. Make sure Enable bidirectional
> support is checked, if not , check it and click Apply, then OK.
>
> If the Spooler is not running, Click Start > Control Panel >
> Administrative Tools > Services. Scroll down and look for Printer Spooler.
> Make sure the Startup Type is set to Automatic. and it is started.
>
>
> --
> thecreator
>
> "aga151" <aga151@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:B8BA7CB9-99AB-4521-B89E-071FB95C5496@xxxxxxxxxxxxxxxx
> > Hi,
> > Having lots of problems with my Lexmark X4580 all-in-one printer running
> > in Windows XP Home.
> > Spooler is not running and now I'm told that I need to : Enable
> > Bidirectional Communications, can anyone offer help on this please
> >
> > regards
> > aga
>
>
>
|
|