|
|
Package: linux-image-2.6.18-3-686
Version: 2.6.18-7
Followup-For: Bug #391867
On my Notebook I have also this problem:
Dec 10 12:31:06 localhost kernel: libata version 2.00 loaded.
Dec 10 12:31:06 localhost kernel: ata_piix 0000:00:1f.2: version 2.00
Dec 10 12:31:06 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Dec 10 12:31:06 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19
(level, low) -> IRQ 50
Dec 10 12:31:06 localhost kernel: PCI: Setting latency timer of device
0000:00:1f.2 to 64
Dec 10 12:31:06 localhost kernel: ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6
bmdma 0xFFA0 irq 14
Dec 10 12:31:06 localhost kernel: scsi0 : ata_piix
Dec 10 12:31:06 localhost kernel: ata1.00: ATA-7, max UDMA/100, 234441648
sectors: LBA48 NCQ (depth 0/32)
Dec 10 12:31:06 localhost kernel: ata1.00: ata1: dev 0 multi count 16
Dec 10 12:31:06 localhost kernel: ata1.00: configured for UDMA/100
Dec 10 12:31:06 localhost kernel: Vendor: ATA Model: FUJITSU MHV2120B
Rev: 0000
Dec 10 12:31:06 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 05
Dec 10 12:31:06 localhost kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376
bmdma 0xFFA8 irq 15
Dec 10 12:31:06 localhost kernel: scsi1 : ata_piix
Dec 10 12:31:06 localhost kernel: ata2.00: ATAPI, max UDMA/33
Dec 10 12:31:06 localhost kernel: ata2.00: configured for UDMA/33
Dec 10 12:31:06 localhost kernel: Vendor: TSSTcorp Model: CD/DVDW SN-S082D
Rev: SS03
Dec 10 12:31:06 localhost kernel: Type: CD-ROM
ANSI SCSI revision: 05
Dec 10 12:31:06 localhost kernel: usb 4-2.1: new full speed USB device using
uhci_hcd and address 3
Dec 10 12:31:06 localhost kernel: SCSI device sda: 234441648 512-byte hdwr
sectors (120034 MB)
Dec 10 12:31:06 localhost kernel: sda: Write Protect is off
Dec 10 12:31:06 localhost kernel: sda: Mode Sense: 00 3a 00 00
Dec 10 12:31:06 localhost kernel: SCSI device sda: drive cache: write back
Dec 10 12:31:06 localhost kernel: SCSI device sda: 234441648 512-byte hdwr
sectors (120034 MB)
Dec 10 12:31:06 localhost kernel: sda: Write Protect is off
Dec 10 12:31:06 localhost kernel: sda: Mode Sense: 00 3a 00 00
Dec 10 12:31:06 localhost kernel: SCSI device sda: drive cache: write back
Dec 10 12:31:06 localhost kernel: sda: sda1 sda2 < sda5 > sda3
Dec 10 12:31:06 localhost kernel: sd 0:0:0:0: Attached scsi disk sda
Dec 10 12:33:43 localhost kernel: ata2.00: qc timeout (cmd 0xa0)
Dec 10 12:33:43 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x2 frozen
Dec 10 12:33:43 localhost kernel: ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51
err 0x20 (timeout)
Dec 10 12:33:50 localhost kernel: ata2: port is slow to respond, please be
patient
Dec 10 12:34:13 localhost kernel: ata2: port failed to respond (30 secs)
Dec 10 12:34:13 localhost kernel: ata2: soft resetting port
Dec 10 12:34:14 localhost kernel: ata2.00: configured for UDMA/33
Dec 10 12:34:14 localhost kernel: ata2: EH complete
Dec 10 12:39:40 localhost kernel: ata2.00: qc timeout (cmd 0xa0)
Dec 10 12:39:40 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x2 frozen
Dec 10 12:39:40 localhost kernel: ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51
err 0x20 (timeout)
Dec 10 12:39:47 localhost kernel: ata2: port is slow to respond, please be
patient
Dec 10 12:40:10 localhost kernel: ata2: port failed to respond (30 secs)
Dec 10 12:40:10 localhost kernel: ata2: soft resetting port
Dec 10 12:40:10 localhost kernel: ata2.00: configured for UDMA/33
Dec 10 12:40:10 localhost kernel: ata2: EH complete
Dec 10 12:45:18 localhost kernel: ata2.00: qc timeout (cmd 0xa0)
Dec 10 12:45:18 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x2 frozen
Dec 10 12:45:18 localhost kernel: ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51
err 0x20 (timeout)
Dec 10 12:45:26 localhost kernel: ata2: port is slow to respond, please be
patient
Dec 10 12:45:49 localhost kernel: ata2: port failed to respond (30 secs)
Dec 10 12:45:49 localhost kernel: ata2: soft resetting port
Dec 10 12:45:49 localhost kernel: ata2.00: configured for UDMA/33
Dec 10 12:45:49 localhost kernel: ata2: EH complete
Dec 10 13:12:20 localhost kernel: ata2.00: qc timeout (cmd 0xa0)
Dec 10 13:12:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x2 frozen
Dec 10 13:12:20 localhost kernel: ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51
err 0x20 (timeout)
Dec 10 13:12:27 localhost kernel: ata2: port is slow to respond, please be
patient
Dec 10 13:12:50 localhost kernel: ata2: port failed to respond (30 secs)
Dec 10 13:12:50 localhost kernel: ata2: soft resetting port
Dec 10 13:12:50 localhost kernel: ata2.00: configured for UDMA/33
Dec 10 13:12:50 localhost kernel: ata2: EH complete
On some resets i can hear a "clack" from the hd... thats sound not so good...
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-686
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.18-3-686 depends on:
ii coreutils 5.97-5 The GNU core utilities
ii debconf [debconf-2.0] 1.5.8 Debian configuration management sy
ii initramfs-tools [linux-initra 0.85b tools for generating an initramfs
ii module-init-tools 3.3-pre3-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.18-3-686 recommends:
ii libc6-i686 2.3.6.ds1-8 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-3-686/postinst/bootloader-error-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-dir-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/kimage-is-a-directory:
linux-image-2.6.18-3-686/preinst/elilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/old-system-map-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/lilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-initrd-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/bootloader-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/removing-running-kernel-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/create-kimage-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/would-invalidate-boot-loader-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/abort-install-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/overwriting-modules-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/initrd-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/lilo-has-ramdisk:
linux-image-2.6.18-3-686/preinst/already-running-this-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/bootloader-test-error-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/abort-overwrite-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/failed-to-move-modules-2.6.18-3-686:
hardware-report.txt
Description: Text document
|
|