[email protected]
[Top] [All Lists]

[L1vpn] I-D ACTION:draft-ietf-l1vpn-applicability-basic-mode-01.txt

Subject: [L1vpn] I-D ACTION:draft-ietf-l1vpn-applicability-basic-mode-01.txt
Date: Tue, 06 Mar 2007 15:50:03 -0500
A New Internet-Draft is available from the on-line Internet-Drafts 
This draft is a work item of the Layer 1 Virtual Private Networks Working Group 
of the IETF.

        Title           : Applicability Statement for Layer 1 Virtual Private 
Networks (L1VPNs) Basic Mode
        Author(s)       : T. Takeda
        Filename        : draft-ietf-l1vpn-applicability-basic-mode-01.txt
        Pages           : 17
        Date            : 2007-3-6
This document provides an applicability statement on the use of 
   Generalized Multiprotocol Label Switching (GMPLS) protocols and 
   mechanisms to support Basic Mode Layer 1 Virtual Private Networks 
   L1VPNs provide customer services and connectivity at layer 1 over 
   layer 1 networks. The operation of L1VPNs is divided into the Basic 
   Mode and the Enhanced Mode where the Basic Mode of operation does not 
   feature any exchange of routing information between the layer 1 
   network and the customer domain. This document examines how GMPLS 
   protocols can be used to satisfy the requirements of a Basic Mode 

A URL for this Internet-Draft is:

To remove yourself from the I-D Announcement list, send a message to 
[email protected] with the word unsubscribe in the body of 
the message. 
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the 
username "anonymous" and a password of your e-mail address. After 
logging in, type "cd internet-drafts" and then 
"get draft-ietf-l1vpn-applicability-basic-mode-01.txt".

A list of Internet-Drafts directories can be found in
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
        [email protected]
In the body type:
NOTE:   The mail server at ietf.org can return the document in
        MIME-encoded form by using the "mpack" utility.  To use this
        feature, insert the command "ENCODING mime" before the "FILE"
        command.  To decode the response(s), you will need "munpack" or
        a MIME-compliant mail reader.  Different MIME-compliant mail readers
        exhibit different behavior, especially when dealing with
        "multipart" MIME messages (i.e. documents which have been split
        up into multiple messages), so check your local documentation on
        how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
L1vpn mailing list
[email protected]
<Prev in Thread] Current Thread [Next in Thread>
  • [L1vpn] I-D ACTION:draft-ietf-l1vpn-applicability-basic-mode-01.txt, Internet-Drafts <=