Re: Probs with HP 3300C Scanner

[KeithS <imposteratsupa@xxxxxxx>]

Tony wrote:


> Have you tried unplugging the power to the scanner and plugging it in again? 
> I've got a 3200C that sometimes has similar problems and that's how I cure 
> it.  Also check all leads are plugged in securely.
> If there is a fault, the most likely culprit is that the scanner light tube 
> might have gone.  Had that happen before where everything from the PC shows 
> up as fine but just wouldn't activate a scan. 

Thanks Tony, I suspected the DC power and had done as you suggested. 
Killed 2 birds with one stone, the light tube was forced on (so that's 
OK)  but the problem still remains :(

--
KeithS.

To reply directly, replace the first at with the second one